Bedienungsanleitung Snooper Evolution (Seite 15 von 28) (Englisch)

619679

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

If you would like to exit the Menu screen at any time press and hold button 2 for

approximately 2 seconds. If no buttons are pressed for a period of five seconds

the unit will automatically exit the Menu and return to your chosen standby

display.

3. Adjusting the Volume

The Snooper Evolution has an adjustable volume for controlling the loudness of

the audible alert. To increase the volume simply rotate the volume control on the

right hand side of the device, towards you. To decrease the volume of the unit

rotate the volume control away from you.

4. MODE/MENU Button

This button has two functions. The Mode function is used to select between three

types of settings, City, Motorway or All. When the button is pressed and held for

two seconds it allows you access to the Menu for further configuration of your

unit.

When selecting your preferred Mode you need to press the ‘SELECT’ button to

confirm the change.

CITY Mode

In CITY mode the Snooper Evolution will ignore any fixed safety cameras that

are located on a motorway and are in range of your unit but not an immediate

threat to you, as you are not actually travelling on that section of road.

MOTORWAY Mode

In Motorway mode (displayed as Mway) the Snooper Evolution will ignore any

fixed safety cameras that are not actually on a motorway road and are within

range of your unit but not an immediate threat to you as you are not actually

travelling on that section of road. If your speed drops below 20mph the device

will sound an audible alert and the message ‘Road Ch?’ will be shown on the

display to remind you that you may no longer be travelling on a section of

motorway and may need to change the mode to ‘CITY’ or ‘ALL’.

ALL Mode

In ALL Mode the Snooper Evolution will detect all fixed safety cameras that are

within the selected range of the unit. If you were travelling on a section of

motorway for instance it would mean that the unit could detect locations situated

on an ‘A’ road that are near to the motorway. As it is not on the road you are

travelling however it is not a threat and you might prefer to select the ‘Mway’

setting so that the unit would ignore unnecessary alerts.

PLEASE NOTE: Whilst in CITY mode the device will not detect any locations

located on a motorway. When the unit is in MWAY mode the unit will not detect

any locations located on ‘A’ roads so you need to remember to change modes

when leaving an ‘M’ type road.

5. Cancel Button

If during an alert you decide that you would like to cancel it simply press and hold

the MUTE/CANCEL button (Button 1). The display will automatically return to the

Standby screen and the device will be ready to alert you to the next GPS

coordinate.

Operating Instructions

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Evolution Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Evolution

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info