Bedienungsanleitung Snooper Evolution (Seite 16 von 28) (Englisch)

619679

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

6. Mute Button

If during an alert you decide that you would like to mute the audible alert, but

still retain a visual alert simply press the MUTE/CANCEL button briefly

(Button 1). The screen will continue to display a visual alert but no sound will

be heard. After you have travelled out of range of the location the unit will

automatically reset so the next time you encounter a location you will receive

both an audible and a visual alert as normal.

7. Alert Pattern

Fixed Speed Safety Cameras

As you approach the fixed speed safety camera the unit will beep twice then

begin to emit either a voice alert or your chosen audible alert (either a Soft or

Hard ‘beep’) at your preset alert distance. As you continue to approach the

fixed speed safety camera the ‘beeping’ will quicken. At the same time the

display will indicate the type of location you are approaching, then the speed

limit at that location and then begin to count down the distance in 50 metre

increments to that location. Once you are less than fifty metres away from the

fixed speed safety camera the unit will alternate the display showing

‘Warning’ and the speed limit for that fixed speed safety camera location.

Automute

When your device alerts you to a location, rather than continually beeping

through the alert, it simply beeps at your selected volume for five seconds

and then automatically mutes the sound to volume level 3 until you are out of

range of the source. This allows you to receive a brief audible alert instead of

a continuous one.

If you would like to change the alert to a visual alert only press the

MUTE/CANCEL button to temporarily turn off the sound. If at any time you

would like to stop the alert, simply press and hold the MUTE/CANCEL button.

8. Saving New Coordinates

If in the unlikely event that you pass the location of a fixed speed safety

camera and your Snooper Evolution does not provide you with an alert, you

have the opportunity to store the coordinates of the location manually. Simply

park safely as close as possible to the site and press and hold the ‘New

Location’ button (button 3) for approximately two seconds. If the voice setting

on your unit is switched on the unit will confirm the location has been added

by saying ‘User data stored’ and the screen will display ‘Save M’ and the

number of the location in your unit’s memory.

When you next pass the site your Snooper Evolution will now alert you to that

new location. As you approach the fixed speed safety camera the unit will

display ‘User Pnt’ and provide either a voice alert stating the location as a

‘Risk zone’ or your chosen audible alert. Your unit can hold up to 99

coordinates in its memory.

Operating Instructions

Return to contents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Snooper Evolution Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Snooper Evolution

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info