619693
15
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
MEM
MUTE
Features and Settings
Your Snooper Sapphire has many different features and settings that you can adjust very easily.
To get into the Menu of the user options press the ‘OK’ control on the right hand side of the unit. Use the ‘OK’
control to scroll through the options by pushing the control upwards or downwards and then select your
desired menu item by pressing the ‘OK’ control.
Please Note: If you would like to exit the Menu at any time press either the ‘MEM’ or the ‘MUTE’
buttons. If you do not press any buttons for a period of five seconds the unit will automatically exit the
Menu and return to the Standby display.
The following menu options are available on your unit. Press the ‘OK’ control once your desired option is
displayed.
1. Set Alert Range
This feature allows you to adjust the distance that your Snooper Sapphire will detect from when approaching a
Fixed Speed Safety Camera location. You can set your pre-alert distance in 50 metre increments from 100m to
a maximum of 1000m or alternatively you can select a new feature - ‘Auto Range’.
Auto-range simply selects the correct alert distance to each camera detected depending on the speed limit of
the road the camera is situated on. The different alert distances are shown below.
Detection distances for Fixed Speed Safety Cameras and High Risk Zones
Speed Limit Pre-Alert
20mph 250m
30mph 300m
40mph 350m
50mph 400m
60mph 700m
70mph 700m
Selecting Your Preferred Detection Distance
To adjust the pre-alert distance:
Press the ‘OK’ control when ‘Set Alert Range’ is
displayed in the menu options
There are two options: ‘Auto’ and ‘User’. Auto
range is activated by default so if you wish to
select your own pre alert distance highlight the
‘User option using the OK control and then
press the ‘OK’ control.
To increase the pre alert distance, push the ‘OK’
control upwards. To decrease the distance push
the ‘OK’ control downwards. Once you have
selected your preferred distance press the ‘OK’
control. The unit will display ‘Setting Confirmed’.
2. Set Volume
You can set the volume level of your unit by
selecting this option.
To change the volume setting:
Press the ‘OK’ control when ‘Set Volume’ is
displayed in the menu options.
To increase the volume push the ‘OK’ control
upwards; to decrease the volume push the ‘OK’
control downwards.
Press the ‘OK’ control to save the new setting.
The unit will display ‘Setting Confirmed’.
Back to contents
MEM
MUTE
15
Set Volume
0 100
- +
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Snooper Sapphire wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Snooper Sapphire

Snooper Sapphire Kurzanleitung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info