797935
16
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
16
español english français portuguese deutsch italiano
When the appliance stops pumping water automatically, you can pour more water in to the container by
taking it out, now you can start brewing.
Note: There may be noise when pumping the water on the rst time, it is normal, the appliance is
releasing the air in the appliance. After about 20s, the noise will disappear.
PRE-HEATING
It is always recommended to pre-heat the co󰀨eemaker before making co󰀨ee, including the metal funnel,
brewing lter and cup, so that the co󰀨ee avour must not be inuenced by the cold parts.
1. Remove the water tank and open the tank cover to ll it with desired water, the water level should not
exceed the “MAX” mark in the water tank. Then place the water tank into its position.
2. Set brewing lter into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance from the “LOCK” position, and you can x them into
co󰀨ee maker rmly through turn it anticlockwise until it is at the“CLOSE” position.
3. Place an espresso cup on drip plate.
4. Then connect the appliance to power supply source. Make sure the knob is always at the horizontal
position(o󰀨-position) before using.
5. Press the power button “ ”. The power indicator will be illuminated and single/double-cup/steam
indicator will start ashing.
6. When single/double-cup/steam indicator becomes steady, it shows the pre-heating is nished.
MAKE ESPRESSO COFFEE
1. Remove the funnel by turning it in clockwise, add grounded co󰀨ee to brewing lter with measuring
spoon, with a spoon grounded co󰀨ee powder you can make about a cup of top-grade co󰀨ee, then
press the ground co󰀨ee powder tightly with the measuring spoon.
2. Set brewing lter into metal funnel, make sure the tube on the funnel aligns with groove in the
appliance, then insert the funnel into the appliance as indicating of “LOCK” mark, and you can x them
into co󰀨ee maker rmly through turning it anticlockwise until it is at the “CLOSE” position.
3. Then place the hot cup on drip plate.
4. Select single cup “ ” or double-cup “ ” according to the need and then press the corresponding
button of the selected function. After waiting for a moment, the co󰀨ee will be owing out.
5. The appliance will stop working when the co󰀨ee-brewing is nished, and your co󰀨ee is ready now.
WARNING: Do not leave the co󰀨ee maker unattended during making the co󰀨ee, as you need operate
manually sometimes!
6. After nish making the co󰀨ee, you can take the metal funnel buy turning it clockwise, then pour the
co󰀨ee residue out .
SET THE DISPENSING AMOUNT
1. Dispensing amount of single cup
Press and hold the single-cup button “ ” for 3 seconds to enter into the mode of setting the
dispensing amount of co󰀨ee And then press the ” button again, the co󰀨ee starts to dispense and
the “Single-cup indicator” ashes at the same time, when the desired amount is got, press the
button again, the co󰀨ee stops dispensing. At that time, the setting for the dispensing amount of single
cup is nished and it will be saved for next operation. The adjustable dispensing amount of single cup
ranges between 25ml and 60ml.
2. Dispensing amount of double-cup
Press and hold the “ ” button for 3 seconds to enter into the mode of setting the dispensing
amount, then follow the operation of setting the dispensing amount of single cup. The adjustable
dispensing amount of double-cup ranges between 70ml and 110ml.
3. Restore factory setting
Simultaneously Press and hold the “ ” and “ ” buttons for 3 seconds to recover the factory
setting of dispensing amount.
If you do not want to brew co󰀨ee when the high-temperature warning occurs, you can press the
or “ ” button again to cancel.
AUTOMATICALLY POWER-OFF FUNCTION
1. After pressing power button, if there is not any operation done within 29 minutes, the unit will power o󰀨
automatically.
2. After pressing power button, if there is not any operation done after pumping about 215ml water, the
pump will stop automatically.
3. After pressing power button, if there is not any operation done after pump worked for 180s to froth the
milk, the pump will stop automatically.
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sogo SS-7600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info