798567
11
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
- That Icon (4) will remain lit, xed indicating that
the water has reached the necessary tempera-
ture for generating steam.
- Place a recipient under the steam tube.
- Open Steam knob (R) anticlockwise.
- Steam only will begin to exit.
- When you have enough, close the control and
remove the recipient.
MPORTANT
- When you nish doing steam, you must re-
ll the water used to make steam, because the
temperature of making steam, is very high,
and reduced the water in the boiler. While you
rell the boiler, at same time, you get the right
temperature (lower) for making coffee.
- To do it, do as per “Getting Hot water
GETTING HOT WATER:
- Put the device in ON situation, pressing the
knob Espresso ON/OFF (F).
- The heating icon (2) will blink on the display
(D).
- Blinking means it has started to heat up.
- When (2) remains xed, it indicates that it has
reached the appropriate temperature.
- Place a container under the nozzle.
- Open the steam control (R), turning him to the
left, counterclockwise.
- The hot water began to come out of the vapor-
izer.
- Once obtained the desired amount of hot water.
- Close The turning knob (R) to the right, clock-
wise.
- The machine will stop supplying water.
FOR DRIP COFFEE
- Make sure there is enough water in the tank.
- Fill the Permanent Filter (O) for drip coffee,
using a measuring spoon.
- Use a maximum of 2 spoonful of coffee, not
too ne.
- Properly place the Drip Filter Holder (N) with
the Drip Filter (O) in the machine.
- Place the thermos jug (S) under the coffee
spout.
- Press the Drip Coffee Switch (E).
- On Display (D), the Drip Coffee Icon will light
up (7).
- The machine will start making coffee.
- When you have nished making coffee, the
machine will emit a warning sound 3 times and
then the machine will automatically turn off.
- You can take out the thermos jug (S) when the
coffee has stopped coming out.
AUTO-OFF FEATURE:
- The SOLAC machines are designed to save
energy
- To that end, after some minutes from the last
operation, the unit switches to energy saving
mode
- To return to normal operation you should just
Switch OFF and Switch ON the connect button
(F)
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch
(F) to OFF
- Unplug the appliance to the mains.
- Remove the water from the water tank.
- Clean the appliance
CLEANING
BASIC CLEANING
- Disconnect the appliance from the mains and
let it cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Neither parts of this appliance are suitable for
cleaning in the dishwasher.
- After washing, dry all the parts before tting
them together and storing.
CLEANING THE FROTHING WAND
- CAUTION! The frothing wand, and frothing
sleeve may be VERY HOT.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Solac CE4497 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info