Bedienungsanleitung Solac CE4523 (Seite 9 von 71) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799499

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

USE AND CARE:

Do not use the appliance if its accessories are not pro-

perly tted.

Do not switch the appliance on without water.

Do not use the appliance if the ON/OFF switch does

not work.

Do not move the appliance while in use.

Respect the MAX and MIN levels.

Disconnect the appliance from the mains when not in

use and before undertaking any cleaning task.

Store this appliance out of reach of children and/or tho-

se with reduced physical, sensorial or mental abilities or

who are unfamiliar with its use.

Do not put the appliance away if it is still hot.

Only use water with the appliance.

Never leave the appliance connected and unattended if

not in use. This also saves energy and prolongs the life

of the appliance.

Do not remove the lter holder when co󰀨ee is being

made, as at that time it is under pressure.

DESCRIPTION

A Cup warming plate

B Steam/water control

C Steam heating button

D 2-co󰀨ee button

E 1-co󰀨ee button

F Drip tray

G Tank lid

H Water tank

I Steamer pipe

J Start/stop button

K Filter for single measure

L Filter for double measure

M Filter for capsules *

N Filter holder

O Measuring spoon with compactor

P Pressure gauge

(*) Only available on Taste Slim ProCAP model (CE4523)

If your model of appliance does not have the accessories described above, they can purchased separately from the Technical Assistance Service.

Dear customer,

Thank you for deciding to purchase a Solac brand pro-

duct.

Thanks to its technology, design and operation and the

fact that it exceeds the strictest quality standards, a fully

satisfactory use and long product life can be assured.

Read these instructions carefully before switching on

the appliance and keep them for future reference. Fai-

lure to follow and observe these instructions may result

in an accident. Failure to follow and observe these ins-

tructions may result in an accident.

INSTRUCTIONS

BEFORE USE:

Make sure that all the product’s packaging material

has been removed.

When using this product for the rst time, it is advisa-

ble to test it with just water.

Before using the product for the rst time, clean the

parts that will come into contact with food in the man-

ner described in the cleaning section.

Before switching the machine on, check that there

is nothing pressing the buttons and that the steam

controller is closed.

FILLING WITH WATER:

The tank must be lled with water before turning the

appliance on.

Remove the tank from the appliance.

Open the lid

Fill the tank with cold water.

Fill the container, respecting the MAX level.

Close the lid.

Replace the tank in its housing, ensuring that it is well

tted.

PRESSURE INDICATOR

The pressure gauge (P) indicates whether the pressu-

re is optimal for the task in hand, when the pointer is in

the OPTIMAL PRESSURE region.

PRIMING THE CIRCUIT

This simple operation ensures optimum dispensing

and has to be performed:

• When rst starting:

• When the machine has not been used for a long

time (1 or 2 weeks)

• After producing steam

• When the tank has run out of water.

Fill the tank with water, making sure not to exceed the

“MAX” level marker.

Connect the appliance to the mains.

Set the On/O󰀨 switch (J) to the On position. The pilot

light will light up

For this operation it is not necessary to wait for the

machine to heat up

Without tting the lter holder, (or with the lter holder

tted, but without co󰀨ee), place a container below the

steam tube (I)

Open the steam control (B) by turning it anti-clockwise.

The pump will start to operate, taking water from the

tank.

Water will come out through the steam pipe. Wait until

approximately one cupful has come out.

To nish the operation, close the steam control (B) by

turning it clockwise.

This will complete the priming operation.

ENENGLISH

Downloaded by: pd-oliana on 12-08-2022 14:11 CEST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac CE4523 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info