Bedienungsanleitung Solac CE4523 (Seite 10 von 71) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799499

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

USE:

Connect the appliance to the mains.

Use the On/O󰀨 switch to switch the appliance on.

The indicator lights on the buttons will ash, indicating

that preheating is taking place.

When the preheating operation has nished, the lights

will remain lit. The buttons will not work during the pre-

heating operation.

The machine is now ready to make your co󰀨ee.

STANDBY MODE

Once the machine is switched on, it automatically goes

into Standby mode, awaiting a command.

In Standby mode the 1-co󰀨ee and 2-co󰀨ee lights stay

lit, and the thermoblock technology maintains the tem-

perature.

BREWING COFFEE

One co󰀨ee

Remove the lter holder, if it is already tted.

To enjoy the full aroma of the co󰀨ee, we recommend

emptying and cleaning the lter with a ne cleaning

brush after each use.

Fill the co󰀨ee lter with 7-8 g of ground co󰀨ee, and

press it down using the compactor on the measuring

spoon.

Place the lter in the lter holder and t the lter holder

in the machine, turning it anticlockwise to its locking

position.

NOTE: We recommend natural roast co󰀨ee. Torrefacto

co󰀨ee may a󰀨ect the operation of the machine.

Press the 1-co󰀨ee button. The machine will start PRE-

BREWING by pouring a little water over the co󰀨ee to

moisten it. It will then brew the co󰀨ee and stop automa-

tically, with three beeps to signal the end of the function.

Once the function has nished, proceed to clean the

lter.

Two co󰀨ees

Repeat all the previous steps, substituting the 1-co󰀨ee

lter for the 2-co󰀨ee one and lling it with approximately

15-16 g of co󰀨ee.

Press the 2-co󰀨ee button and the machine will operate

until brewing is completed.

Co󰀨ee capsule (Only on the Taste Slim ProCap model)

Open the capsule accessory lid by turning it anti-cloc-

kwise.

Place the capsule face up inside the space and close

the lid.

Put the accessory into the lter holder, positioning the

lid at the bottom of it.

Proceed to brew the co󰀨ee as normal.

To extract the capsule, remove the lter holder and

allow it to cool.

Take o󰀨 the lid and recycle the capsule as recommen-

ded by the capsule manufacturer.

Hot water

In Standby mode, open the steam/hot water control.

The pump will start to work and hot water will come out

through the steamer pipe.

Once nished, close the pipe using the steam control.

Steam / Frothing Milk

In Standby mode, press the steam button. This will start

to ash, indicating that the thermoblock is heating to a

temperature of 130 ºC to produce dry steam.

Insert the steamer pipe into the container holding the

milk or liquid to be heated.

Open the steam/hot water control. The pump will emit

small pulse sounds, generating steam.

Once the milk or liquid is hot, close the steam control

and wipe the pipe clean with a cloth.

When the function has nished, press the co󰀨ee button

to lower the temperature and switch back to Standby

mode.

COFFEE QUANTITY PROGRAMMING

With this co󰀨ee it is possible to set the amount of co󰀨ee

that each button brews. To do this, make a co󰀨ee by fo-

llowing the instructions above, changing only one step:

When pressing the button to brew the co󰀨ee, keep it

pressed down until you reach the desired quantity and

then release it.

The machine saves this setting for subsequent brews.

The time can be set from 20 to 75 seconds. (25 ml –

160 ml)

PROGRAMMING THE COFFEE MAKER

Programming menu

First, make sure that the co󰀨ee maker is in Standby

mode.

Next, press and hold the steam heating button for 5

seconds.

The lights on the buttons will ash consecutively. The

programming menu has now been accessed.

NOTE: If the machine remains inactive for 15 seconds,

it automatically switches back to standby mode.

Programming the temperature

Access the programming menu.

Press the 1-co󰀨ee button to enter the temperature set-

ting. Once pressed, the machine uses the lights to show

which level it was at:

1-co󰀨ee 2-co󰀨ees Steam Level

X Low

temperature

(70 ±5* ºC)

X X Medium

temperature

(75 ±5* ºC)

X X X High

temperature

(80 ±5* ºC)

* Temperature may vary depending on external condi-

tions.

Downloaded by: pd-oliana on 12-08-2022 14:11 CEST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac CE4523 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info