Bedienungsanleitung Solac CE4523 (Seite 12 von 71) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

799499

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

STEAMER PIPE CLEANING

ATTENTION! All of the steamer components can be-

come very hot.

It is advisable to clean the steamer pipe after genera-

ting steam and before switching o󰀨 the machine to pre-

vent a build-up of dirt.

To do this, take the sleeve o󰀨 the steamer pipe.

Place a glass containing with a little water, under the

pipe and submerge the pipe in the water.

Follow the instructions in the “Hot Water” section to

make hot water come out through the pipe.

Use a cloth to dry the pipe and put the sleeve back on.

If no steam comes out, dry milk may be blocking the

outlet. In which case, carefully use a needle to unclog

the tip of the steamer pipe.

Once clean, rinse under running tap water and reas-

semble it. Generate some more steam.

HOW TO DEAL WITH LIME

SCALE INCRUSTATIONS:

For the appliance to work correctly it should be kept free

of limescale or magnesium deposits caused by using

hard water.

To prevent this kind of problem, we recommend the use

of water with low lime or magnesium mineralisation.

The co󰀨ee maker tells you when descaling is needed

by beeping and the three lights switch on without as-

hing.

When this happens, ll the tank with 1L of water and

add a descaling agent (citric acid, descaler...)

Access the programming menu as described earlier in

the manual.

Place a large container (enough to hold 1L water) under

the steamer pipe.

Open the steam control to the MAX position.

Press the steam heating button again and the machine

will begin the descaling process. This process takes

about 5 minutes.

A specic anti-lime scale product should be used on this

kind of product.

NOTE: Should you also want to clean the entire co󰀨ee

system, you can alternate the ow of water by using the

steam control.

NOTE: Home-made solutions, such as the use of vine-

gar, are not recommended for de-scaling this appliance.

Once the operation has nished, rell the tank with

clean water and go through the process again, but

without descaling agent, to eliminate any remains left

inside the machine.

Once nished, clean the water tank and the machine is

now ready for use.

FAULTS AND REPAIR

Take the appliance to an authorised technical support

service if problems arise. Do not try to dismantle or re-

pair it, as this may be dangerous.

Lit button warnings

Operation LED indicators

On/O󰀨 The machine is

preparing itself.

Start of the

co󰀨ee brewing

function

Flashing: Pre-heating.

Steady: Ready to make

co󰀨ee.

Start of the

steam function

Flashing: Pre-heating.

Steady: Ready for steam

Open steam

control

Flashing: Reminder to

close the steam control

Thermoblock

too hot.

Steady: It needs to cool

down.

Descale

warning.

The 3 lights light up.

Proceed with descaling.

NTC fault. The 3 lights ash

simultaneously.

Downloaded by: pd-oliana on 12-08-2022 14:11 CEST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac CE4523 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info