Bedienungsanleitung Solis 7220 - Twist Air (Seite 42 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

708885

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

GB GB

●

Note: Humidiﬁcation will be even more effective if the ﬁlled water is not very

cold. However, the water temperature should not lie above 30 °C, as this might

damage parts of the appliance.

4. Place the motor unit back on the appliance base. Make sure that the holes in

the nib of the appliance base are aligned to the holes near the connection jack

of the motor unit.

➔

5. Connect the connection plug of the power adapter to the jack on the motor

base.

6. Connect the power plug to the power socket, a signal sounds. Touch the ON/

OFF button to switch the appliance on. A signal sounds, the function lights

indicating the standard setting light up (ON/OFF, LIGHT, II).

s

STARTING UP /

MAKING ADJUSTMENTS

●

If you brieﬂy touch the function buttons, the respective setting is made. The

corresponding function light glows blue. Each touch of a button is followed by

a sound signal.

ON/OFF BUTTON

;

●

Once the power plug is connected to a power outlet, you can start the air humid-

iﬁer with the

;

button. A signal sounds, the appliance starts at the medium

humidiﬁcation level and the LED light in the motor unit lights up, switching

between 7 colours. The function buttons next to

;

, LIGHT and II light up in

blue (standard setting).

●

Touch the

;

button again to switch the appliance off. A signal sounds, the

display goes out and the appliance switches off.

s

BEFORE FIRST USE

●

Before using your air humidiﬁer for the ﬁrst time, remove all possibly attached

advertisement stickers (except for the type plate).

●

Should the appliance be stored at very low temperatures, you should let it stand

at room temperature for approx. 1 hour before starting to use it.

●

Only use the appliance when the room temperature lies somewhere between

5 °C and 40 °C. The relative humidity should not exceed 80 %. By the way: Rel-

ative humidity between 40 % and 60 % is ideal.

●

The appliance must not be covered, sufﬁcient air circulation around the appli-

ance is vital for the smooth performance of the humidiﬁcation function. We

recommend keeping a minimum distance of 50 cm to walls, heaters and other

objects. Make sure that the power adapter has not yet been connected to the

appliance and is not plugged into a power outlet.

1. Carefully remove the motor unit by lifting it up and away.

2. Take the humidiﬁcation mat out of the appliance base and remove the pack-

aging material. Place the humidiﬁcation mat back in the water basin, the ﬂoat

gauge is positioned at the centre of the humidiﬁcation mat and the positioning

ring lies on top of the humidiﬁcation mat (the studs on the ring are facing down).

The tip of the ﬂoat gauge is stuck into the central ring. Like that, the ﬂoat gauge

is ﬁxed into place.

3. Fill the water basin with fresh, cold tap water. The water level is visible through

the viewing panel. Do not exceed the MAX marking.

●

Caution: Do not mix any additives like essential oils or perfumes into the

water! These additives damage the appliance resp. cause discolorations

to the plastic. Appliances that are damaged by adding additives are

excluded from warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 7220 - Twist Air Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info