Bedienungsanleitung Solis 7220 - Twist Air (Seite 43 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

708885

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

GB GB

ADJUSTING THE AUTOMATIC MODE

●

With the button, you can adjust the automatic mode. The LED light in the

motor unit lights up either in red, blue or orange, depending on the current

room air humidity. Depending on the humidity of the room, the unit automati-

cally adjusts the current ventilation speed resp. humidiﬁcation output.

●

The LED light glows red: The room air humidity is between 0 and 45 %, so the

fan operates at high speed and the humidiﬁcation level is high.

●

The LED light glows blue: The room air humidity is between 45 and 65 %, so

the fan operates at medium speed and the humidiﬁcation level is medium.

●

The LED light glows orange: The room air humidity is above 65 %, so the fan

works at low speed, the humidiﬁcation level is low.

●

If you touch the button again, the automatic mode is switched off and the

appliance operates in manual mode. The LED light in the motor unit is switched off.

ADJUSTING VENTILATION SPEED

●

Use the button to adjust the ventilation speed and thus the humidiﬁcation

level. Each touch of the button switches the appliance to the next level, the

corresponding function light lights up. You can choose between four speed

settings:

●

Low (I) – Medium (II) – High (III) – Turbo (all three function lights illuminate)

●

If you touch the button again after the “Turbo” setting has been selected,

the appliance returns to the low setting (I).

●

As a general rule: The higher the ventilation speed, the more intensive the

humidiﬁcation will be.

SETTING THE SLEEP MODE AND ADJUSTING THE LIGHT

COLOUR FOR THE NIGHT LIGHT

●

You can use the button to either select a LED color to be permanently used

or to activate the sleep mode.

●

One touch: If you touch the button once, the function light at LIGHT will ﬂash

3 times and the currently lit LED colour will be selected for constant illumination.

●

Two touches: If you touch the button twice, the SLEEP function light ﬂashes 10

times and the appliance switches to sleep mode: humidiﬁcation and ventilation

are at the lowest level, all lights go out.

●

Three touches: If you touch the button a third time, the sleep mode is deacti-

vated and the appliance is working at the low humidiﬁcation level. No LEDs are

lit on the motor unit. The function lights for ON/OFF and low (I) light up in blue.

●

Four touches: If you touch the button a fourth time, the LED light in the motor

unit lights up, switching between 7 colours, the appliance is working at the low

humidiﬁcation level. The function lights for ON/OFF, LIGHT and low (I) light up

in blue.

●

Note: If you previously were in automatic mode or in manual mode without

light and now want to set the light colour, touch the

button once to return

to standard mode where all 7 LED lights will alternately light up. If you then

touch the

button one more time, the LED colour that is currently lit remains

constantly lit. Touch the

button again to enter sleep mode.

s

AFTER USE

●

If you want to switch the appliance off completely, always touch the ON/OFF

button

;

ﬁrst, pull the power plug from the power socket and disconnect the

connection plug from the appliance.

●

If you do not want to use the appliance for more than 2 days, we recommend

pouring the water out of the water basin and drying the water basin with a dry

towel as well as leaving the appliance open to air dry the humidiﬁcation mat.

●

In general, we recommend pouring the water remaining in the water

basin away before ﬁlling new water.

“LOW WATER LEVEL IN WATER BASIN” NOTIFICATION

●

If the water level in the water basin is too low, the function light next to ON/

OFF lights up in red. The fan remains in operation for a few hours to dry the

humidiﬁcation mat. After that, the appliance stops automatically.

●

In normal mode resp. automatic mode, the fan remains in operation for another

7 hours to dry the humidiﬁcation mat, the function light next to ON/OFF

switches from blue to red and ﬂashes during the process. After the 7 hours

have elapsed, the fan stops automatically, but the function light next to ON/

OFF still ﬂashes red.

●

In SLEEP mode, the fan remains in operation for another 10 hours to dry the

humidiﬁcation mat, the function light next to ON/OFF lights up red. After the

10 hours have elapsed, the fan stops automatically, but the function light next

to ON/OFF remains red.

s

DAILY / WEEKLY CARE OF YOUR

AIR HUMIDIFIER

1. Change the water in the water basin every day. Only use fresh tap water without

any additives.

2. Clean the humidiﬁcation mat and the water basin every week.

3. Should you not use the air humidiﬁer for more than 2 days, we recommend

pouring the water out of the water basin and leaving the appliance open.

4. Should you not want to use your appliance for prolonged periods of time, please

clean and dry all parts carefully and store the air humidiﬁer in the original pack-

aging in a dry room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 7220 - Twist Air Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info