58
▲
GRINDING WITH THE
GRINDING CONTAINER
1. Fill the open stainless steel grinding container with dry foods like seeds, nuts etc.
In any case, pay attention to the MAX marking in the container and do not over-
fill it!
2. Screw the blade base back onto the grinding container by giving it a quarter turn
in a clockwise direction. The blade base must be screwed on all the way to pre-
vent the contents from escaping.
Caution: The blender will only blend if the motor base has been correctly
screwed onto the grinding container. This will unlock the safety switch.
3. Place the grinding container in the motor base with the blade base facing
downwards. The arrow on the blade base should line up with the arrow on the
motor base.
4. Plug the power plug into a suitable power socket.
5. Turn the grinding container with the blade base in a clockwise direction to the
LIQUIFY position and blend for a maximum of 30 seconds resp. even shorter, until
the desired consistency has been reached. Then, turn the grinding container with
the blade base in a counter-clockwise direction until both arrows are lined up
again (OFF position). The motor stops. If you want to keep grinding, you have
to allow the motor to cool down for 30 seconds in any case. The stainless steel
grinding container needs the same amount of time to cool down. Caution: Blend
for a maximum of 30 seconds, then let the motor cool down for 30 seconds.
6. You can grind continually (position LIQUIFY) or use the PULSE function. To do
that, repeatedly turn the grinding container to the LIQUIFY position and back to
the OFF position (both arrows line up). Repeat this multiple times and the
motor is switched on and off at short intervals.
7. Once the grinding process has been finished, turn the grinding container to the
OFF position. Wait a few seconds for the blades and the motor to come to a full
stop and pull the power plug. If the grinding container has heated up, touch the
blade base instead of the grinding container to unscrew it. Remove the grind-
ing container from the motor base, turn the container upside down and unscrew
the blade base from the container in a counter-clockwise direction. Caution: The
grinding container might have heated up in the grinding process.
If the blender is not in use or before it is disassembled, cleaned or stored, it always
has to be unplugged.
SOLIS Power Blender TO GO-E_2016 27.06.16 17:39 Seite 58
