Bedienungsanleitung Solo 646 (Seite 11 von 26) (Englisch)

658827

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Refuelling and adding oil to the chain lubrication system

- 33 - ENGLISH 11

6.1 Fuel information

A high performance two-stroke engine

operated with a petrol:oil mixture (petrol + oil =

fuel mixture) or with a special fuel mixture for two-

stroke engines available from specialists powers this

machine.

We recommend the proprietary “Aspen 2-takt”

special fuel mixture. Please observe the special fuel

manufacturer’s instructions.

Information on individual mixing of the fuel mixture

Normal or super unleaded petrol can be used for

individual mixing purposes (minimum octane

number 92 RON).

When using a particularly high quality proprietary 2-

stroke engine oil such as the “SOLO Profi 2T-

Motoröl” which we supply, we recommend an

oil:petrol mixing ratio of 1:50 (2%).

When using other brands of 2-stroke oil we

recommend a mixing ratio of 1:25 (4%).

Only use proprietary 2-stroke engine oil!

Never store fuel mixture longer than 3 - 4 weeks.

Fuel mixture table

Oil in litres Petrol in

litres

SOLO 2T engine oil

2% (50 : 1)

Other two-

stroke oils

4% (25 : 1)

1 0,020 0,040

5 0,100 0,200

10 0,200 0,400

Unsuitable petrol or deviations in the mixing ratio

may lead to serious engine damage!

Avoid direct skin contact with petrol and avoid

inhaling petrol fumes - health hazard!

6.2 Fuelling

While fuelling always follow all safety instructions and

take all safety precautions.

Handle fuel only with the engine turned off.

Carefully clean the area around the filler inlet.

Place the machine with the fuel inlet pointing

upwards. Unscrew the tank lid and fill the fuel

mixture up to the lower edge of the filler neck. Use a

funnel with filter to prevent tank contamination. After

filling the tank replace the tank lid and tighten firmly.

6.3 Chain lubrication

Chainsaw oil with an anti-fling additive that

helps the oil adhere to the chain should be

used for lubrication of the saw chain and guide

bar.

Note: You should generally always add the chain oil

whenever topping up with fuel.

If the saw is used regularly we recommend the use

of biodegradable chainsaw oil.

The bio-chainsaw oil available from SOLO

(order no. 00 83 107, 1 litre) has been

awarded the German blue angel symbol for

eco friendliness (RAL UZ 48).

Biodegradable chainsaw oil only has a limited

lifespan and should be used within a period of 2

years from the printed date of manufacture.

Important: If you are planning to not use the saw for

more than 2 months and are using bio-chainsaw oil

then you will need to drain the oil tank and then add a

small quantity of engine oil (SAE 30). Then run the

chainsaw for a while to ensure that all bio-oil residue

has been flushed out from the tank, oil pickup hose

and cutting device. Fill up with bio-chainsaw oil again

when you are ready to take the saw back into

operation again.

(schematic diagram)

To check the chain lubrication, hold the guide bar

over a light-coloured object (e.g. tree stump) and run

the chainsaw at medium speed (approx. half throttle

setting). A light trace of oil forms on the light-coloured

object.

Important: Never work without chain lubrication.

Check the operation of the chain lubrication system

and the level of the oil in the oil tank every time

before you start work. Never re-use old oil.

Notes for new saw chains:

Before installing a new

chain we recommend soaking it in a container (bowl)

with chain oil with anti-fling additives that help the oil

adhere to the chain. Once the chain has been

installed, do not start to cut wood straight away, but

allow the machine to run at part throttle for a while

until a slight oil trail forms on a lightly coloured

background.

Fig. 5

Fig. 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 646 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solo 646

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info