474213
20
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Commissioning
19
Checking emergency release
With sectional doors, or doors with ceiling guides, you have the
option of activating the backjump with DIP switch 6 in order to
offload the operator and door mechanisms.
Close the door with the drive.
Pull the emergency release (N) 1x.
If the emergency release cannot be operated, loosen the end switch
(V) and move it in direction (1).
Open the door with the drive and close it again. Test the emergency
release again.
Checking force setting
Whenever the door is opened or closed, the control unit compares the
memorised force setting with the force actually needed and automatically
adjusts the memorised setting accordingly when the given final travel
position is reached.
For checking details see 'Maintenance and Care' section.
Programming of remote control
Prior to the initial programming of the hand-held transmitters,
clear the memory of the radio receiver.
Clearing radio receiver memory
Press and hold the programming key (1).
- After 5 seconds, the LED (3.1 or 3.2) flashes. After another
10 seconds, the LED is constantly on (3.1 or 3.2).
- After 25 seconds, all LEDs are on (3.1 + 3.2).
Release the programming key (1). All channel data has been
deleted.
Programming the radio transmitter
Press the programming key (1)
- 1x for channel 1; LED (3.1) is on
- 2x for channel 2, LED (3.2) is on
- If no other code signal is transmitted within 10 seconds, the radio
receiver switches to standard operation.
- Aborting programming: repeatedly press the programming key (1)
until all LEDs are off.
Press and hold desired hand-held transmitter key (5) until the LED
(3.1 / 3.2) is off (depending on the selected channel).
The LED is off - the programming process is completed.
The hand-held transmitter has transmitted the radio codes to the
radio receiver.
5
2
6
3.1
3.2
1
7
8
4
5
6
5
2
6
4
3.1
3.2
1
V
N
1
Continue with programming the other hand-held transmitters. To do this,
repeat the above steps. The maximum number of memory blocks is 112
per radio receiver.
Attaching instruction label
Attach the instruction label for the operation of the emergency
release to the emergency release rope.
Attaching warning sign
Attach the warning signs (text + triangle sign) at a position where
they are clearly visible, e.g. beside the push-button (warning triangle)
and on the door leaf (text + warning triangle).
1.
1.
2.
2.
1.
1.
2.
2.
N
N
46502V000-172006-0-OCE_Rev.A
1x1x1x
1x1x1x
46502V000-172006-0-OCE_Rev.A
A
B
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sommer-duo-650sl

Suche zurücksetzen

  • Was muss ich machen um ddn Code der Fernbedienung zu ändern? Eingereicht am 29-5-2023 14:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sommer Duo 650SL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sommer Duo 650SL

Sommer Duo 650SL Bedienungsanleitung - Deutsch - 37 seiten

Sommer Duo 650SL Bedienungsanleitung - Holländisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info