474213

Sommer Duo 650SL Seite 24

24
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
23
General tips
DIP switch
• Depending on the position (OFF or ON) of a DIP switch, a number of
additional functions can be activated or deactivated.
By default, all DIP switches are -> OFF.
Obstacle recognition (DIP 1, 2 + 3)
DIP switch 1
OFF No response in the event of a safety input interruption.
In the event of a force cut-off, the door is halted
ON Drive stops door
(no response at 8.2 kOhm or Fraba system)
DIP switch 2: function - safety connection 1, terminals 6 + 7
OFF NC contact for light barrier / 8.2 kOhm safety contact unit
ON Fraba system
DIP switch 3
OFF Drive stops and opens door a little (reversal).
ON Drive stops and opens door completely.
Safety connection function 1 (DIP 2)
When in position OFF, the drive system automatically detects
whether a light barrier or a 8.2 kOhm bar is connected.
DIP switch 2 (terminal 6 + 7)
OFF Light barrier / 8.2 kOhm safety contact unit
ON Fraba system
Early warning period (DIP 5)
After the button or hand-held transmitter is actuated, the warning light is on
for 3 seconds, before the drive is started and when the drive opens or
closes the door. If the push-button is pressed again or the manual remote
control is operated during the 3 seconds, the early warning period is ended
prematurely.
The early warning period functions in conjunction with both internal lighting
and with a connected warning lamp.
DIP switch 5
OFF Deactivated
ON Activated
Drive behaviour upon closing the door
If the door meets an obstacle (force cut-off) or if the safety input is inter-
rupted (person triggering the light barrier), this is detected by the drive
system, depending on the position of the DIP switches 2 + 3.
Drive behaviour upon opening the door
If the door meets an obstacle (force cut-off) or if the safety input is inter-
rupted (person triggering the light barrier), this is detected by the drive sys-
tem, depending on the position of the DIP switch 1.
Backjump (DIP 6)
In vertical-sectional doors, you have the option of activating
the backjump with DIP switch 6 in order to offload the operator
system and the door. It also facilitates the activation of the
emergency release.
This feature serves the purpose of supporting door and drive mechanism
operation. The drive mechanism moves briefly back in a door OPEN
direction once it has reached the door CLOSED final travel position, thus
taking some of the strain off the other equipment.
DIP switch 6
OFF Deactivated
ON Activated
Defined opening and closing (DIP 7)
Push-button/radio channel 1 open the door and push-button/radio channel
close it. 2-channel operation can also occur using just two push-buttons or
just the manual remote control.
Requirement: DIP switch 8 is OFF; 2 push-buttons are connected or
2 manual remote control push-buttons have been taught in.
DIP switch 7
OFF Deactivated
ON Activated
Partial opening (DIP 8)
This function opens the door either completely or partially, depending on
the given setting.
Ideas for use: garage ventilation, opening of side-opening door for personal
access, to name but a few. Partial opening can also occur using just two
push-buttons or just the manual remote control.
DIP switch 8
OFF Deactivated
ON Activated; DIP switch 7 not functioning
Partial opening using 2 push-buttons
Fit additional push-button and connect as push-button 2 to terminals 4 + 5.
Push-button 1 always opens door fully.
If the door has been partially opened by pressing push-button 2, it can be
fully opened by pressing push-button 1.
Push-button 2 only carries out partial opening when the door is CLOSED.
Should the door have been fully opened using push-button 1 or partially
opened with push-button2,itcanbeclosedbyagain pressing push-button 2.
Procedure:
1. Close door.
2. Set DIP switch 8 to ON, thus activating partial opening functionality
- always leave DIP switch 8 in ON position; the OFF position
automatically deletes the partial opening function that has been set.
3. Press push-button 2 (opens door from CLOSED final travel position)
- door opens until such time as push-button 2 is pressed again or OPEN
final travel position has been reached.
4. Press push-button 2 when the desired position has been reached.
5. Close door by pressing push-button 2.
Partial opening has been memorised and door is opened to set position by
pressing push-button 2.
Set DIP switch 8 to OFF position to delete partial opening setting.
Partial opening via manual remote control
(2-channel operation)
Teaching in 2 manual remote control push-buttons:
e.g. push-button 1 on to radio channel 1 and push-button 2 on to channel 2.
Radio channel l always has the same function as push-button 1;
terminals 2 + 3
Radio channel 2 always has the same function as push-button 2;
terminals 4 + 5.
Procedure as described above.
Functions and Connections marathon
… 24 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sommer-duo-650sl

Suche zurücksetzen

  • Was muss ich machen um ddn Code der Fernbedienung zu ändern? Eingereicht am 29-5-2023 14:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sommer Duo 650SL wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sommer Duo 650SL

Sommer Duo 650SL Bedienungsanleitung - Deutsch - 37 seiten

Sommer Duo 650SL Bedienungsanleitung - Holländisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info