Bedienungsanleitung Sommer S 9080 pro (Seite 60 von 88) (Englisch)

680782

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

S10931-00001_Rev-D_EN

Opening, closing and stopping the door

1. Press the button (1) to open and close.

⇒ The door opens or closes depending on the

starting position.

2. Press the button (1) during the opening or closing

process.

⇒ The door stops:

3. Press the button (1) again.

⇒ The door moves into the respective starting

position.

Turning the lighting on and off

The button (2) lights up green when the Wallstation is

ready for operation and the operator is not locked.

1. Press the button (2).

⇒ Operator lighting switched on

2. Pressing the button (2) again switches the operator

lighting back off.

⇒ Operator lighting off.

INFORMATION

If the operator lighting is not switched off

manually, it switches off automatically after

60 minutes. This value can be changed via

SOMlink and a WiFi-enabled device.

The lighting cannot be switched off when the operator

is moving.

Locking or unlocking the operator

Unauthorised access can be prevented by locking

the operator. For example in the absence of the user

or to prevent unintentional activation with a handheld

transmitter.

The following functions are deactivated in the factory

settings when the lock button is activated:

• Radio (handheld transmitter)

• Senso ventilation function

• Command device (corded external button)

To lock:

The button (2) on the Wallstation lights up green when

the operator is unlocked. The button (2) lights up red

when the operator has been locked by the Wallstation.

1. Press and hold the button (3) for at least 5 seconds

with the door closed.

⇒ Button(2)ashesgreen.

⇒ After 5 seconds, button (2) lights up red.

Locking function activated.

All the functions of the operator are locked.

INFORMATION

If the door was still open, it can be closed

using the handheld transmitter. Only then

are all operator functions locked.

To unlock:

1. Press the button (3) for at least 5 seconds.

⇒ Button(2)ashesred.

⇒ Button (2) lights up green.

⇒ Locking function deactivated.

All the functions of the operator are activated

again.

INFORMATION

All locking and unlocking functions can

be modied and adjusted with SOMlink

and a WiFi-enabled device. For more

information, ask your specialist dealer.

11.9 Conex

Two corded external buttons can be connected to the

KEYPAD connection with the Conex accessory part.

The function of the external buttons can be configured

via DIP switch 1 of the wall control unit. The factory

setting of DIP switch 1 is "OFF."

KEYPAD

Fig. Keypad connection

The Conex accessory part is plugged into the KEYPAD

slot, see separate "Conex" instructions.

DIP switches on

the wall control

unit

OFF

• "Conex"

additional

circuit board

• T1denes

door OPEN

• T2denes

door CLOSE

• "Conex"

additional

circuit board

• T1 pulse

sequence

• T2 lighting

function/partial

opening

11. Connections and special functions of the wall

control unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sommer S 9080 pro Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sommer S 9080 pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info