Bedienungsanleitung Sony BDV-N990W (Seite 57 von 68) (Englisch)

533600

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Additional Information

The disc does not play.

t The region code on the BD/DVD does not

match the system.

t Moisture has condensed inside the unit and

may cause damage to the lenses. Remove the

disc and leave the unit turned on for about half

an hour.

t The system cannot play a recorded disc that is

not correctly finalized (page 58).

File names are not displayed correctly.

t The system can only display ISO 8859-1

compliant character formats. Other character

formats may be displayed differently.

t Depending on the writing software used, the

input characters may be displayed differently.

A disc does not start playing from the

beginning.

t Resume play has been selected. Press

OPTIONS and select [Play from start], then

press .

Playback does not start from the resume

point where you last stopped playing.

t The resume point may be cleared from

memory depending on the disc when

• you open the disc tray.

• you disconnect the USB device.

• you play other content.

• you turn off the unit.

The language for the soundtrack/subtitle or

angles cannot be changed.

t Try using the BD’s or DVD’s menu.

t Multi-lingual tracks/subtitles or multi-angles

are not recorded on the BD or DVD being

played.

Bonus contents or other data that are

contained in a BD-ROM cannot be played.

t Try the following:

1 Remove the disc.

2 Turn the system off.

3 Remove and reconnect the USB device

(page 28).

4 Turn the system on.

5 Insert the BD-ROM with BONUSVIEW/

BD-LIVE.

The USB device is not recognized.

t Try the following:

1 Turn the system off.

2 Remove and reconnect the USB device.

3 Turn the system on.

t Make sure that the USB device is securely

connected to the (USB) port.

t Check if the USB device or a cable is damaged.

t Check if the USB device is on.

t If the USB device is connected via a USB hub,

disconnect it and connect the USB device

directly to the unit.

The picture/sound is poor/certain programs

display with a loss of detail, especially

during fast-motion or dark scenes.

t Picture/sound quality may be poor depending

on Internet content providers.

t Picture/sound quality may be improved by

changing the connection speed. Sony

recommends a connection speed of at least 2.5

Mbps for standard-definition video and 10

Mbps for high-definition video.

t Not all videos contain sound.

The picture is small.

t Press X to zoom in.

The [Control for HDMI] function does not

work (“BRAVIA” Sync).

t Check that [Control for HDMI] is set to [On]

(page 49).

t If you change the HDMI connection, turn the

system off and on again.

t If power failure occurs, set [Control for HDMI]

to [Off], then set [Control for HDMI] to [On]

(page 49).

t Check the following and refer to the operating

instructions supplied with the component.

• The connected component is compatible with

the [Control for HDMI] function.

Playback USB device

BRAVIA Internet Video

“BRAVIA” Sync ([Control for

HDMI])

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDV-N990W Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDV-N990W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info