Bedienungsanleitung Sony bravia kdl-52w4500 (Seite 53 von 55) (Englisch)

142120

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

Additional Information

The TV cannot be found from

renderer-compatible

equipment (the controller)

Check Connections

• Check that the LAN cable and/or mains lead of the server has not

become disconnected.

Check Settings

• Check if the “Renderer Function” is activated (page 46).

• Check that the connected device is registered under “Renderer Access

Control” (page 46).

Channels

The desired channel cannot be

selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service.

• Channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

Digital channels are not

displayed

• Contact a local installer to find out if digital transmissions are provided

in your area.

• Upgrade to a higher gain aerial.

General

Distorted picture and/or sound • Keep the TV away from electrical noise sources such as cars,

motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the

optional equipment and the TV.

• Check the aerial/cable connection.

• Keep the aerial/cable TV cable away from other connecting cables.

The TV turns off

automatically (the TV enters

standby mode)

• Check if the “Sleep Timer” is activated, or confirm the “Duration”

setting of “On Timer Settings” (page 38).

• If no signal is received and no operation is performed in the TV mode

for 10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically • Check if the “On Timer” is activated (page 38).

Some input sources cannot be

selected

• Select “AV Preset” and cancel “Skip” of the input source (page 40).

The remote does not function • Replace the batteries.

A channel cannot be added to

the Favourite list

• Up to 999 channels can be stored in the favourite list.

You have a blank TV listings

in the GUIDE Plus+ system

• Check the aerial/cable connection.

• Your cabling and set-up is OK, but your GUIDE Plus+ system was not

connected for enough time to receive TV listings data. Leave the TV

“STANDBY” overnight (24 hours) or use “Manual Data Download”

(page 19).

• You live in a country/region where the GUIDE Plus+ system is not yet

available. Check the list of countries to see if you are in a region that is

supported.

(http://www.europe.guideplus.com/)

HDMI equipment does not

appear on “HDMI Device

List”

• Check that your equipment is “Control for HDMI” compatible

equipment.

Not all channels are tuned • Check support web site for cable provide information.

http://support.sony-europe.com/TV/DVBC/

You cannot select “Off” in

“Control for HDMI”

• If any “Control for HDMI” compatible audio equipment is connected to

the TV, you cannot select “Off” in this menu. If you want to change the

audio output to the TV speaker, select “TV Speaker” in the “Speaker”

menu (page 41).

Condition Explanation/Solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony bravia kdl-52w4500 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony bravia kdl-52w4500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info