Bedienungsanleitung Sony CDP-XA20ES (Seite 14 von 56) (Englisch, Französisch, Spanisch)

50551

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Recording From CDs

Recording a CD by Specifying

Tape Length (Time Edit/Just

Edit)

You can have the player create a program that will fit

the length of the tape. Select one of the following

options:

• Time Edit: automatically creates a program, keeping

the original order of the disc.

• Just Edit: automatically arranges the track order to fit

the tape length.

The program can contain up to 24 tracks (a pause

inserted between tracks is counted as one track).

Note that tracks whose numbers are over 24 cannot be

programmed.

✬

EDIT/TIME FADE

❖

✴ / ✭

Recording Your Own Program

You can record the program you’ve created on a tape,

DAT or MD. The program can contain up to 24 tracks.

By inserting a pause during programming, you can

divide the program into two for recording on both

sides of a tape.

1 Create your program (for side A when recording

on a tape) while checking the total playing time

indicated in the display.

See “Creating a program on the player” on page

11.

2 When you record on both sides of the tape, press

❖ to insert a pause.

The “P” and

A B

indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape or on a

DAT or MD, skip this step and go to Step 4.

A pause is counted as one track

You can program up to 23 tracks when you insert a

pause.

3 Repeat Step 1 to create the program for side B.

4 Start recording on the deck and then press ✬ on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

5 When you record on side B, reverse the tape and

press ✬ or ❖ on the player to resume playing.

To check and change your program

See pages 12 and 13.

The

indication appears while checking the program

for side A and

while checking the program for side

You can automatically insert a blank space of 3

seconds between each track

Use the Auto Space function (see page 16).

❖✬

PLAY MODE

Recording From CDs

➠ AMS ➥

1 Press EDIT/TIME FADE before you start playing

as follows:

• To select Time Edit, press the button until

“EDIT” appears and “A” in the

indication

flashes in the display.

• To select Just Edit, press the button until “JUST

EDIT” appears and “A” in the

indication

flashes in the display.

2 Press ✴ or ✭ to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

♠ HALF  C-46  C-54  C-60  C-74  C-90  - -. - - ▼

(23.00) (27.00) (30.00) (37.00) (45.00)

When you select “HALF”

The player sets the program of each side to a half of the

total playing time of the disc. If tracks are already

programmed, select “HALF” after erasing the program

(see page 13). Note that you cannot select “HALF” when

the disc has more than 24 tracks.

3 Press EDIT/TIME FADE to have the player create

the program.

The display shows the tracks to be recorded. “B” in

the

indication flashes in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XA20ES Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XA20ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info