Bedienungsanleitung Sony CDP-XA20ES (Seite 15 von 56) (Englisch, Französisch, Spanisch)

50551

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Recording From CDs

4 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

program for side B. The display shows the

programmed tracks.

When you record on one side of the tape or on a

DAT or MD, skip this step.

5 Start recording on the deck and then press ✬ on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

6 When you record on side B, reverse the tape and

press ✬ or ❖ on the player to resume playing.

To cancel Time Edit/Just Edit

Press PLAY MODE repeatedly until “SHUFFLE” and

“PROGRAM” disappear from the display (or press

CONTINUE on the remote).

You can program the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a program from the remaining tracks. In

this case, you cannot select “HALF” to specify the tape

length.

You can freely specify the tape length

Set the tape length using ➠ AMS ➥ .

Example: When the tape length of one side is 30 minutes

and 15 seconds

1 To set the minutes, turn ➠ AMS ➥

until “30” appears in the display, then push

➠ AMS ➥ .

2 To set the seconds, turn ➠ AMS ➥

until “15” appears in the display, then push

➠ AMS ➥ .

When tracks, which aren’t numerically consecutive on

the disc, are programmed consecutively (i.e. 1, 3, 5

etc.)

A one-second access time blank is added between the

tracks.

You can automatically insert a blank space of 3

seconds between each track

Use the Auto Space function (see page 16).

You can check and change the program

See pages 12 and 13.

Fading In or Out

You can manually fade in or out to prevent tracks from

starting or ending abruptly.

Note that you cannot use this effect when you use the

DIGITAL OUT connector.

EDIT/TIME FADE

✬

✴ / ✭

❖

Start play fading in

End play fading out

FADER

Press FADER

During pause.

FADE

lights up in

the display and the P indication

flashes. The play fades in.

When you want to start fading out.

FADE

lights up in the display and

the ♣ indication flashes. The play

fades out and the player pauses.

Changing the fading time

You can change the fading time from 2 to 10 seconds

before fading in or out. If you don’t change it, fading

lasts for 5 seconds.

1 Press FADER before you start playing.

“5 SEC” appears and “

FADE

” flashes in the

display.

2 Press ✴ or ✭ to specify the fading time.

Fading out at the specified time

(Time Fade)

You can have the player fade out automatically by

specifying the playing time. Once you set the Time

Fade, it works twice, that is, the play fades out at the

end of both sides of a tape.

1 Press EDIT/TIME FADE repeatedly before you

start playing until “

FADE

TIME

” and “A” in the

indication appear in the display.

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XA20ES Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XA20ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info