Bedienungsanleitung Sony CDP-XE200 (Seite 11 von 46) (Englisch, Französisch, Spanisch)

50589

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Playing CDs

The program remains even after the Program Play

ends

When you press (, you can play the same program

again.

You can check the total playing time while

programming using the remote (Program Edit)

To select a track, press = or + and check the total

playing time. Then press PROGRAM to confirm your

selection.

Notes

• The total playing time doesn’t appear in the display when it

exceeds 100 minutes.

• “FULL” appears in the display when you try to add a track

to a program which already contains 24 tracks.

Checking the track order

You can check your program before or after you start

playing.

Press CHECK.

Each time you press this button, the display shows the

track number in the programmed order. After the last

track in the program, the display shows “End” and

returns to the original display. If you check the order

after you start playing, the display shows only the

remaining track numbers.

Changing the track order

You can change your program before you start playing.

Erase a track

Erase the last track in the

program

Add tracks to the end of the

program

Change the whole program

completely

You need to

Press CHECK until the track

you don’t want appears in

the display, then press

CLEAR

Press CLEAR. Each time you

press the button, the last

track will be cleared.

Turn ≠ AMS ± until

track number you want to

add appears, then press

ENTER.

When using the remote,

press the number button of

the tracks to be added

(except for CDP-XE200).

Press p (stop). Create a new

program following the

programming procedure.

Recording from CDs

Recording Your Own Program

You can record the program you’ve created on a tape,

DAT or MD. The program can contain up to 24 tracks.

By inserting a pause during programming, you can

divide the program into two for recording on both

sides of a tape.

• CDP-XE500

• CDP-XE300 and CDP-XE200

Playing CDs

≠ A M S ±ENTER

· P

PLAYMODE

≠ A M S ±ENTER

PLAYMODE

1 Create your program (for side A when recording

on a tape) while checking the total playing time

indicated in the display.

Follow Steps 1 to 4 in “Creating a program on the

player” on page 9 or Steps 1 and 2 in “Creating a

program using the remote” on page 10.

The indication appears in the display.

2 When you record on both sides of the tape, press

P to insert a pause.

The “P” and indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape or on a

DAT or MD, skip this step and go to Step 4.

A pause is counted as one track

You can program up to 23 tracks when you insert a

pause.

3 Repeat Step 1 to create the program for side B.

4 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

5 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XE200 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XE200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info