Bedienungsanleitung Sony DSC-S1900 (Seite 13 von 120) (Deutsch)

527782

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

NederlandsPortuguêsEspañolItalianoFrançaisDeutschEnglish

Using the CUBE

Using the Tuner Function

CUBE are equipped with a tuner function. In addition to manual

tuning, you can also use it as a chromatic tuner.

* Use manual tuning when the strings are substantially out of tune

(such as after changing strings).

CUBE-20GX CUBE-40GX/CUBE-80GX

* The illustration shows the

CUBE-80GX

Manual Tuning

1. Press the [TUNER] button.

The unit enters the Tuner mode and the [TUNER] button lights up.

* No sound will be output from the speaker or from any of the jacks.

* The sound input to the i-CUBE LINK/AUX IN jack is output.

2. Use the TYPE switch to select the string that you want to

tune.

Knob Position String (note name)

Open seventh string of a

seven-string guitar (B)

CUBE-40GX/

CUBE-80GX

only

Open sixth string (semitone

down) (E )

6E Open sixth string (E)

5A Open fth string (A)

4D Open fourth string (D)

3G Open third string (G)

2B Open second string (B)

1E Open rst string (E)

Open fth string (semitone

down) (A

)

CUBE-40GX/

CUBE-80GX

only

Open fth string (whole tone

down) (G)

* The reference pitch is A = 440 Hz. This cannot be changed.

3. Play a single note on the open string that you want to

tune.

Tune the string until the green indicator lights.

Flat

Lights

red

Lights

green

Lights

red

Sharp

Pitch is

correct

* The red indicator blinks if the pitch is substantially out of tune.

4. When you have nished tuning, press the [TUNER] button

once again.

Chromatic Tuning

If you hold down the [TUNER] button for one second or longer, the

[TUNER] button blinks and the unit becomes usable as a“chromatic

tuner,” which automatically determines the name ofthe note closest

to the one played.

As with manual tuning, chromatic tuning allows you to play asingle

note on the string that you want to tune. Tune the string until the

green indicator lights.

Using i-CUBE LINK

“i-CUBE LINK” allows you to use the included mini cable (4-pole) to

connect your iPad/iPhone so that audio can be played back from

the iPad/iPhone while the sound of your guitar playing on the CUBE

is sent to the iPad/iPhone.

This function lets you use an iPad/iPhone app to record and play

back the sound of your guitar.

iPad/iPhone

app

Guitar sound

Sound will be input from the iPad/

iPhone to the CUBE.

Guitar

sound

iPad/iPhone

output

The sound of your guitar will be sent from the CUBE to the

iPad/iPhone.

* If you only want to hear the sound that’s being input from the iPad/

iPhone, turn down the [VOLUME] knob of each channel.

For details on i-CUBE LINK and on iPhone/iPad apps that can use

i-CUBE LINK, refer to Roland website.

http://www.roland.com/

Restoring the Factory Settings

Here’s how the settings stored in the CUBE can be returned to their

factory-set condition (factory reset).

1. While holding down the [LEAD] button and [SOLO]

(MEMORY) button, turn the power on.

• All indicators will blink, and the settings stored in SOLO will

return to their factory-set state.

• The CUBE will return to memory priority mode (p. 9)

(

CUBE-40GX/80GX

only

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DSC-S1900 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DSC-S1900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info