Bedienungsanleitung Sony DVP-NS9100ES (Seite 80 von 96) (Englisch)

60018

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

◆ AUDIO ATT (attenuation)

If the playback sound is distorted, set this

item to “ON.” The player reduces the audio

output level.

This function affects the output of the

following jacks:

– AUDIO OUT L/R 1/2 jacks

– 5.1CH OUTPUT jacks

◆ AUDIO DRC (Dynamic Range Control)

(DVD VIDEO/DVD-RW only)

Allows smaller sound to be heard at low

volume when playing a DVD that conforms

to “AUDIO DRC.” This feature applies only

to Dolby Digital-encoded soundtracks. This

affects the output from the following jacks:

– 5.1CH OUTPUT jacks

Notes

• When “DOLBY DIGITAL” is set to “D-PCM,”

you cannot set “AUDIO DRC” to “WIDE

RANGE.” Even if you have already set “AUDIO

DRC” to “WIDE RANGE,” when you set

“DOLBY DIGITAL” to “D-PCM,” “AUDIO

DRC” is changed to “STANDARD” forcibly.

• When “AUDIO DRC” is set to “WIDE RANGE,”

sound may not be output from the component

connected to the AUDIO OUT L/R 1/2 or HDMI

jack.

◆ AUDIO FILTER (except Super Audio CD)

Selects a digital filter to reduce noise above

22.05 kHz (Sampling frequency (Fs) of the

audio source is 44.1 kHz), 24 kHz (Fs is 48

kHz), or 48 kHz (Fs is above 96 kHz).

Note

There may be little effect by changing the digital

filter depending on the disc or playback

environment.

◆ DOWNMIX (DVD VIDEO/DVD-RW only)

Switches the method for mixing down to 2

channels when you play a DVD which has

rear sound elements (channels) or is recorded

in Dolby Digital format. For details on the

rear signal components, see “Displaying the

disc’s audio information” (page 55). This

function affects the output of the following

jacks:

– AUDIO OUT L/R 1/2 jacks

– DIGITAL OUT (COAXIAL or OPTICAL)/

HDMI OUT/i.LINK jacks when “DOLBY

DIGITAL” or “DTS” is set to “D-PCM”

(page 81).

◆ DIGITAL OUT (except Super Audio CD)

Selects if audio signals are output via the

DIGITAL OUT (COAXIAL or OPTICAL)

jack.

OFF Normally, select this position.

ON Select this when the playback sound

from the speakers is distorted.

STANDARD

Normally select this position.

WIDE

RANGE

Gives you the feeling of being

at a live performance.

SHARP

Provides a wide frequency

range and spatial feeling.

SLOW Provides smooth and warm

sound.

DOLBY

SUR-

ROUND

Normally select this position.

Multi-channel audio signals are

output to two channels for

enjoying surround sounds.

NORMAL Multi-channel audio signals are

downmixed to two channels for

use with your stereo.

Normally select this position.

OFF The influence of the digital circuit

upon the analog circuit is minimal.If

you are using the HDMI OUT jack,

PCM sound will be output depending

on the connected equipment.

If the signal is encrypted for copyright

protection purposes, the signal is only

output as 48 kHz/16 bit PCM.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVP-NS9100ES Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVP-NS9100ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info