Bedienungsanleitung Sony DVP-NS9100ES (Seite 81 von 96) (Englisch)

60018

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Settings and Adjustments

◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW

only)

Selects the type of Dolby Digital signal.

◆ MPEG (DVD VIDEO/DVD-RW only)

Selects the type of MPEG audio signal.

◆ DTS (DVD VIDEO/DTS-CD)

Selects the type of DTS signal.

Note

When “DTS” is set to “DTS” and a DTS-CD is

played back, audio signals are not output from the

AUDIO OUT L/R 1/2 jacks. When a component

that cannot receive the stream signal of DTS is

connected to the HDMI OUT jack, audio signals are

not output from the HDMI OUT jack.

◆ 48 kHz/96 kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio

signal.

Notes

• The analog audio signals from the AUDIO OUT

L/R 1/2 jacks and 5.1CH OUTPUT jacks are not

affected by this setting.

• If the HDMI OUT jack is connected to equipment

not compatible with 96 kHz/24 bit signals,

48 kHz/16 bit PCM will be automatically output

even when you select “96 kHz/24 bit.”

• Super Audio CD audio signals are not output from

the DIGITAL OUT (COAXIAL or OPTICAL)/

HDMI OUT jack.

• If you connect a component that does not conform

to the selected audio signal, a loud noise (or no

sound) will come out from the speakers,

damaging your ears or speakers.

• When audio signals are output from the HDMI

OUT jack/i.LINK S200 (AUDIO) jack, the

settings of “DIGITAL OUT” (except ON/OFF

setting) are available.

◆ AUDIO (HDMI)

Selects the type of audio signal output from

the HDMI OUT jack.

Note

A loud noise (or no sound) will be output if you

connect the player to a TV that is not compatible

with DOLBY DIGITAL/DTS signals and “AUTO”

is selected. In this case, select “PCM.”

D-PCM Select this when the player is

connected to an audio

component lacking a built-in

Dolby Digital decoder. You can

select whether the signals

conform to Dolby Surround

(Pro Logic) or not by making

adjustments to the

“DOWNMIX” item in

“AUDIO SETUP” (page 80).

DOLBY

DIGITAL

Select this when the player is

connected to an audio

component with a built-in

Dolby Digital decoder.

PCM

Select this when the player is

connected to an audio

component without a built-in

MPEG decoder. If you play

MPEG audio sound tracks, the

player outputs stereo signals

via the DIGITAL OUT

(OPTICAL or COAXIAL)

jack.

MPEG Select this when the player is

connected to an audio

component with a built-in

MPEG decoder.

D-PCM

Select this when the player is

connected to an audio

component without a built-in

DTS decoder.

DTS Select this when the player is

connected to an audio

component with a built-in DTS

decoder.

48kHz/16bit The audio signals of DVD

VIDEOs are always converted

to 48 kHz/16 bit.

96kHz/24bit All types of signals including

96 kHz/24 bit are output in their

original format. However, if the

signal is encrypted for

the signal is only output as

48kHz/16bit.

AUTO

Normally, select this. Outputs

audio signals according to the

“DIGITAL OUT” settings

(page 80).

PCM Converts Dolby Digital, DTS,

or 96 kHz/24 bit PCM signals to

48 kHz/16 bit PCM.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVP-NS9100ES Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVP-NS9100ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info