Bedienungsanleitung Sony HDR-XR500VE (Seite 111 von 136) (Englisch)

514528

111

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

111

Table of Contents Useful Recording Techniques Index

The temperature of your camcorder is

extremely low. Turn off your camcorder and

take it to a warm place. Leave the camcorder

there for a while, then turn on the camcorder.

Photos cannot be recorded.

You cannot record photos together with:

[SMTH SLW REC]

[FADER]

The ACCESS/access lamp remains lit or

flashing even if recording was stopped.

Your camcorder is recording the scene you

have just shot on the recording media.

The imaging field looks different.

The imaging field may look different

depending on the condition of your

camcorder. This is not a malfunction.

The flash does not work.

You cannot record with the flash:

when capturing photos while shooting a

movie

if a conversion lens (sold separately) or a filter

(sold separately) is attached

Even if auto flash or (Auto redeye

reduction) is selected, you cannot use the

flash with:

NightShot

[SPOT MTR/FCS]

[MANUAL] in [EXPOSURE]

[SPOT METER]

[TWILIGHT], [SUNRISE&SUNSET],

[FIREWORKS], [LANDSCAPE],

[SPOTLIGHT], [BEACH] or [SNOW] in

[SCENE SELECTION]

The actual recording time for movies is

less than the expected recording time of

the recording media.

Depending on the recording conditions, the

time available for recording may be shorter, for

example when recording a fast moving object,

c. (p. 120).















The camcorder stops operating.

The temperature of your camcorder is

extremely high. Turn off your camcorder and

leave it for a while in a cool place.

The temperature of your camcorder is

extremely low. Turn off your camcorder and

take it to a warm place. Leave the camcorder

there for a while, then turn on the camcorder.

If you keep applying vibration on the

camcorder, recording may stop.

There is a time difference between the

point when START/STOP is pressed and

the point that the recording movie is

started or stopped actually.

On your camcorder, there may be a slight

time difference between the point where you

press START/STOP and the actual point that

recording movie starts/stops. This is not a

malfunction.

The horizontal to vertical ratio of the

movie (16:9 (wide)/4:3) cannot be

changed.

The horizontal to vertical ratio of high

definition image quality (HD) movies is 16:9

(wide).

The auto focus does not function.

Set [FOCUS] to [AUTO] (p. 103).

The recording conditions are not suitable for

uto focus. Adjust the focus manually (p. 103).

SteadyShot does not function.

Set [ STEADYSHOT] to [ACTIVE] or

[STANDARD], [

STEADYSHOT] to [ON]

(p. 77, 83).

Even if [

STEADYSHOT] is set to

[ACTIVE] or [STANDARD], or

[

STEADYSHOT] is set to [ON], your

camcorder may not be able to compensate for

excessive vibrations.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-XR500VE Seite 111

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-XR500VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info