Bedienungsanleitung Sony HDR-XR500VE (Seite 112 von 136) (Englisch)

514528

112

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

112

Table of Contents Useful Recording Techniques Index

The subjects passing by the screen very

fast appear crooked.

This is called the focal plane phenomenon.

This is not a malfunction. Because of the way

the image device (CMOS sensor) reads out

image signals, the subjects passing by the lens

rapidly might appear crooked depending on

the recording conditions.

The color of the image is not correctly

displayed.

Set the STD/LOW LUX/NIGHTSHOT switch

to STD (p. 35).

The screen image is bright, and the

subject does not appear on the screen.

Set the STD/LOW LUX/NIGHTSHOT switch

to STD (p. 35).

The screen image is dark, and the subject

does not appear on the screen.

Press and hold DISP down for a few seconds

to turn on the backlight (p. 38).

Horizontal stripes appear on the images.

This occurs when recording images under a

fluorescent lamp, sodium lamp, or mercury

amp. This is not a malfunction.

[LCD BL LEVEL] cannot be adjusted.

You cannot adjust [LCD BL LEVEL] when:

The LCD panel is closed on your camcorder

with the LCD screen facing out.

The power is supplied from the AC Adaptor.

Sound is not recorded correctly.

If you disconnect an external microphone, etc.

during recording movies, sound may not be

recorded correctly.

Connect the microphone again in the same

way as when you start recording movies.







Playback

Images cannot be played back.

Select the recording media you want to

play back by touching

(HOME) 

(MANAGE MEDIA)  [MOVIE MEDIA

ET]/[PHOTO MEDIA SET] (p. 70).

Select the image quality of a movie you want

to play back by touching

(HOME) 

(SETTINGS)  [VIEW IMAGES SET] 

[

/ SET] (p. 88).

Photos cannot be played back.

Photos cannot be played back if you have

modified files or folders, or have edited the

data on a computer. (The file name flashes in

that case.) This is not a malfunction.

Photos recorded on other devices may not be

played back. This is not a malfunction.

is indicated on an image on the

VISUAL INDEX screen.

This may appear on an image recorded on

other devices, edited on a computer, etc.

You removed the AC Adaptor or the battery

pack before the ACCESS/access lamp is turned

off after recording. This may damage your

image data and

is displayed.

is indicated on an image on the

VISUAL INDEX screen.

The image data base file may be damaged.

Check the data base file by touching

(HOME) 

(MANAGE MEDIA) 

[REPAIR IMG.DB F.]  the recording

medium. If it still appears, delete the image

with

(p. 57).

No sound or only a quiet sound is heard

during playback.

Turn up the volume (p. 42).

Sound is not output when the LCD screen is

closed. Open the LCD screen.

When you record sound with [MICREF

VEL] (p. 107) set to [LOW], the recorded

sound may be difficult to hear.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HDR-XR500VE Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HDR-XR500VE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info