Bedienungsanleitung Sony ht fs3 (Seite 60 von 68) (Englisch)

419871

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

• If you resume playback of a disc when

volume is maximum, there may be no sound.

In this case, turn down the volume, turn off

the system and turn on again.

Sound is interrupted or there is noise.

• Check the output audio formats supported

by this system on page 62.

There is no picture or an unclear picture

appears on the TV screen.

• Check that the TV is selected correctly.

• Set the TV to the appropriate input mode.

• Move your audio components away from the

TV.

• If a video signal other than those supported

by the system is input, the image may be

distorted.

The source image input to the HDMI jack on the

subwoofer is not output from the TV.

• Check the HDMI connection.

• Depending on the playback component, you

may need to set up the component. Refer to

the operating instructions of each

component.

• Use a High Speed HDMI cable. If you use a

Standard HDMI cable, 1080p images may

not be displayed properly.

Control for HDMI

The Control for HDMI function does not work.

• Check the HDMI connection (page 12).

• Make sure “CTRL: HDMI” is set to “ON” in

AMP menu.

• Make sure the connected component is

compatible with the Control for HDMI

function.

• Check the Control for HDMI settings on the

connected component. Refer to the

operating instructions supplied with the

connected component.

• If you change the HDMI connection, or

connect/disconnect the AC power cord

(mains lead), or if there is a power failure,

repeat the procedures of “Preparing for the

“BRAVIA” Sync” (page 29).

• The system may not work correctly if you

select a component that is not compatible

with the Control for HDMI function on the

TV side.

No sound is output from the system and the

TV’s speaker.

• Check the volume of the system and the TV.

• Select the input of the system correctly.

The sound is output from both the system and

the TV.

• If the Control for HDMI function is set to off,

or the selected component is not compatible

with the Control for HDMI function, turn off

the sound of the system or the TV.

The System Power Off function does not work.

• Change the setting of the TV to turn

connected components off automatically

when you turn off the TV. For details, refer

to the operating instructions of the TV.

An image does not appear on the TV.

• Check whether HDMI IN and HDMI OUT

are connected correctly.

A message stating that the output method has

changed from the system speaker to the TV

speaker appears on the TV screen.

• When the DMPORT function is selected, the

System Audio Control function does not

work (page 32).

When the system is in standby mode, there is

no image or sound on the TV.

• When the system is in standby mode, image

and sound are output from the HDMI

component selected the last time you turned

off the system. If you are enjoying other

component, play the component and

perform the One-Touch Play operation, or

turn on the system to select the HDMI

component you want to enjoy.

• Make sure “POWER SAVE” is set to “OFF”

in the AMP menu if you connect

components not compatible with the

“BRAVIA” Sync to the system (page 34).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony ht fs3 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony ht fs3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info