Bedienungsanleitung Sony ht fs3 (Seite 61 von 68) (Englisch)

419871

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Additional Information

The S-AIR function

S-AIR connection is not established (sound

transmission is not established), e.g., the

indicator of the S-AIR sub unit turns off,

flashes, or turns red.

• If you use another S-AIR main unit, place it

more than 8 m (about 25 feet) away from the

S-AIR main unit you are using.

• Confirm that the S-AIR IDs of the

subwoofer and the S-AIR sub unit are the

same (page 51).

• Another S-AIR sub unit is paired to the

S-AIR main unit. Pair the desired S-AIR sub

unit with the S-AIR main unit (page 54).

• Place so that the S-AIR main unit and S-AIR

sub unit are separated from other wireless

devices.

• Avoid using any other wireless devices.

• The S-AIR sub unit is turned off. Make sure

the AC power cord (mains lead) is connected

and turn on the S-AIR sub unit.

No sound is heard from the S-AIR sub unit.

• If you use another S-AIR main unit, place it

more than 8 m (about 25 feet) away from the

S-AIR main unit you are using.

• Confirm that the S-AIR IDs of the

subwoofer and the S-AIR sub unit are the

same (page 51).

• Check the pairing setting (page 54).

• Place the S-AIR main unit and S-AIR sub

unit closer together.

• If you are using any equipment that

generates electromagnetic energy such as a

microwave oven near an S-AIR product, turn

off the equipment and try using the S-AIR

product again after waiting for a short time.

• Place so that the S-AIR main unit and S-AIR

sub unit are separated from other wireless

devices.

• Avoid using any other wireless devices.

• Change the “RF CHANGE” setting

(page 56).

• Change the S-AIR ID settings of the S-AIR

main unit and S-AIR sub unit.

• Turn off the system and S-AIR sub unit, then

turn on them.

• Sources with copyright protection may not

be playable on S-AIR receivers.

• Wireless surround amplifiers cannot be used

with this system. The system does not

support S-AIR devices other than S-AIR

receivers.

There is noise or the sound skips.

• If you use another S-AIR main unit, place it

more than 8 m (about 25 feet) away from the

S-AIR main unit you are using.

• Place the S-AIR main unit and S-AIR sub

unit closer together.

• If you are using any equipment that

generates electromagnetic energy such as a

microwave oven near an S-AIR product, turn

off the equipment and try using the S-AIR

product again after waiting for a short time.

• Place so that the S-AIR main unit and S-AIR

sub unit are separated from other wireless

devices.

• Avoid using any other wireless devices.

• Change the “RF CHANGE” setting

(page 56).

• Change the S-AIR ID settings of the S-AIR

main unit and S-AIR sub unit.

Other

The remote does not function.

• Point the remote at the remote sensor in

the front panel display.

• Remove any obstacles in the path between

the remote and the front panel display.

• Replace both batteries in the remote with

new ones, if they are weak.

• Make sure you select the correct input on the

remote.

The volume turns down when the output

method changes from the TV speaker to the

system speaker.

• The Volume Limit function is working. For

details, refer to “Using the Volume Limit

function” (page 32).

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony ht fs3 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony ht fs3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info