Bedienungsanleitung Sony HT-IS100 (Seite 73 von 84) (Englisch)

68343

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Additional Information

If you experience any of the following

difficulties while using the system, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should any

problem persist, consult your nearest Sony

dealer. When bringing the system in for repairs,

be sure to bring in the entire system.

General

The power is not turned on.

• Check that the AC power cord (mains lead)

is connected securely.

If “PROTECTOR” and “PUSH POWER”

appears alternately in the top panel display.

Press ?/1 to turn off the system, and check

the following item after “STANDBY”

disappears.

• Is anything blocking the ventilation holes of

the system?

After checking the above item and fixing

any problems, turn on the system. If the

cause of the problem cannot be found even

after checking the above item, consult your

nearest Sony dealer.

Dolby Digital or DTS multi channel sound is

not reproduced.

• Check that the playing Blu-ray Disc, DVD,

etc., is recorded in Dolby Digital or DTS

format.

• Check that audio setting (settings for the

audio output) of the connected component.

The surround effect cannot be obtained.

• Depending on the digital signal, the

surround processing may not work

(page 38).

No sound or only a very low-level sound is

heard from the speakers.

•Press 2 + and check the volume level.

•Press or 2 + to cancel the muting

function.

• Press SOUND FIELD and check the

selected sound field.

• Depending on the source, the sound effect of

the speakers may be less noticeable.

The sound comes from the center speaker

only.

• Check the speaker connections and settings

(page 15, 55).

• Depending on the disc, the sound may come

from the center speaker only.

No sound is heard from the center speaker.

• Check the speaker connections and settings

(page 15, 55).

• Set the sound field to other than “OMNI-

DIRECTIONAL SOUND” (page 38).

• Depending on the source, the effect of the

center speaker may be less noticeable.

No sound or only a very low-level sound is

heard from the surround speakers.

• Check the speaker connections and settings

(page 15, 55).

• Check the selected sound field (page 38).

• Depending on the source, the effect of the

surround speakers may be less noticeable.

• A monaural or stereo (not multi channel)

signal is being played.

The sound is delayed compared to the image

of the TV.

• Set “A/V SYNC” to “SYNC OFF” when

“A/V SYNC” is set.

Connected components

There is no sound or only a very low-level

sound no matter which component is selected.

• Check that this system and components are

connected correctly and securely.

• Check that both this system and the selected

component are turned on.

There is no sound from the selected

component.

• Check that the component is connected

correctly to the audio input jacks for that

component.

Additional Information

Troubleshooting

continuedcontinued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony HT-IS100 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony HT-IS100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info