136405
13
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Chapter 1 Overview 13
Chapter 1 Overview
........................................................................................................................................................................................................
1) “EE” stands for “Electric to Electric.” In EE mode, the video and audio signals input to the VCR’s recording circuitry do
not pass through any magnetic conversion circuits but output via electric circuits only. This mode is used to check the input
signals and adjust input levels. The pictures output in EE mode are referred to as EE pictures.
4 MENU button
Press this button to display the menu on screen.
For details on the menu, see “Operating the Menus” on
page 65.
5 J/j/K/k buttons
Use these buttons in menu settings and other settings.
You can adjust the brightness of images by pressing
J/j buttons, while the data (format, the tape running
mode) is displayed on the LCD screen.
The display of the brightness level adjustment
disappears in a second after the adjustment completes.
While the time counter is displayed, the position of the
time counter moves up and down by pressing J/j
buttons. When the small size time counter is displayed,
the position of the time counter moves not only to the
up and down, but also to the right and left by pressing
K/k buttons.
While STATUS CHECK screen is displayed, you can
switch the screen by pressing J/j buttons.
6 EXEC (execute) button
Use this button in menu settings.
7 STATUS CHECK button
Press this button to check the audio level and menu
settings. To display STATUS CHECK screen, press
STATUS CHECK button.
Every time you press J/j buttons, STATUS CHECK
screen switches in the order of AUDIO, OUTPUT,
ASSIGN, and CUSTOM REPEAT. To hide STATUS
CHECK screen, press STATUS CHECK button again.
Note
Audio level meter display varies depending on the
settings of [AUDIO MODE] in [AUDIO SET] menu,
AUDIO OUTPUT SELECT switch, and the audio
mode on the tape played back.
8 LCD (Liquid Crystal Display) monitor
Display the playback or EE
1)
pictures. Also,
superimposed time data, status information, menus,
audio level meters, etc. are displayed.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony hvr m25p wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info