Bedienungsanleitung Sony hvr m25p (Seite 15 von 104) (Englisch)

136405

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Chapter 1 Overview 15

Chapter 1 Overview

Notes

• The unit does not have an LP recording mode of the

consumer DV format. Only SP recording mode is

available.

• To set the unit to recording pause mode with the

remote control unit DSRM-10 (not supplied), press

PAUSE button while holding down PLAY button to

set the unit to the playback pause mode, then press

REC button on the DSRM-10.

• When the recording mode is set in HDV format, it

may take a few seconds to start recording. During this

time, REC indicator blinks.

4 FF (fast forward) button / indicator

When you press this button, the indicator lights and the

tape is fast forwarded. During fast forward, the picture

does not appear on the monitor. (you can see the

picture as it is seen in EE mode during fast forward.)

To locate a scene while monitoring the picture, keep

pressing this button during fast forward, playback or in

playback pause mode (picture search).

For details on [VTR SET] menu, see “VTR SET” on page

74.

Notes

• If you set [EE/PB SEL] in [IN/OUT REC] menu to

[PB], EE picture and EE audio signals are not output.

• If you set [FF/REW SPEED] in [VTR SET] menu to

[SHUTTLEMAX], the picture is played back during

fast forward.

For details on running speed with [SHUTTLEMAX], see

“FF/REW SPEED” in “VTR SET” menu on page 74.

5 PLAY button / indicator

When you press this button, the indicator lights and

playback begins.

If you press this button while holding down REW

button during stop, the tape is rewound to its beginning

and starts playing automatically (during rewind, REW

indicator lights and PLAY indicator blinks).

Notes

• When the unit is playing back a part of the tape

where the recording format has been changed among

HDV format, DVCAM format, and DV format, or

between 60i format and 50i format, the picture and

sound may be distorted.

• The unit cannot play back a tape recorded in the LP

recording mode of the consumer DV format.

6 REW (rewind) button / indicator

When you press this button, the indicator lights and the

tape starts rewinding. During rewind, the picture does

not appear on the monitor. (you can see the picture as

it is seen in EE mode during rewind.) To locate a scene

while monitoring the picture, hold this button down

during rewind, playback or in the playback pause

mode.

If you press PLAY button while holding down this

button during stop, the tape is rewound to its beginning

and starts playing automatically (during rewind, REW

indicator lights and PLAY indicator blinks).

For details on [VTR SET] menu, see “VTR SET” on page

74.

Notes

• If you set [EE/PB SEL] in [IN/OUT REC] menu to

[PB], EE picture and EE audio signals are not output.

• If you set [FF/REW SPEED] in [VTR SET] menu to

[SHUTTLEMAX], the picture is played back during

fast forward.

For details on running speed with [SHUTTLEMAX], see

“FF/REW SPEED” in “VTR SET” menu on page 74.

7 STOP button

Press this button to stop the tape transport operation

completely.

8 PAUSE button / indicator

Press this button to set the unit to pause mode. The

indicator lights while recording, playing, or audio

dubbing. Press this button again to resume the

operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony hvr m25p Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info