Bedienungsanleitung Sony KD-84X9005 (Seite 17 von 784) (Englisch, Französisch, Spanisch)

525760

Zoom out

Zoom in

Vorherige Seite

1/784

Nächste Seite

Satellite Auto Tuning:

“Satellite Auto Tuning” automatically tunes

in available satellite channels. Digital

Satellite Equipment Control (DiSEqC) 1.0

management allows setting of up to four

different satellites. The following settings

are independent for each connection. To

set-up DiSEqC input in the “DiSEqC

Control”, use “LNB Configuration”. Single

Cable Distribution enables the delivery of

satellite broadcasting using a single

coaxial cable to multiple receivers

eliminating the numerous cables required.

1 “Antenna Configuration”:

1 Please select “Fixed Antenna or

DiSEqC” or “Single Cable Distribution”.

2 For “Single Cable Distribution” you can

select the range for “Band” between

1-8 and set your desired “Band

Frequency”.

• “Single Cable Distribution” may not be

available depending on your country/area.

The following procedure may be required

depending on the area:

1 Please select “Preferred Satellite” or

“General Satellite”.

2 For “Preferred Satellite”, select your

preferred operator.

2 “Advanced Settings”:

Allows you to set tuning settings in more

detail to better find the type of services you

would prefer to tune.

“Scan Type”: If no channel is found using

“Network Scan”, try “Full Scan”.

“Full Scan”: Performs a complete

frequency scan and guarantees tuning to

all possible programmes for the currently

set LNB configuration. Previously – tuned

programmes will be lost.

“Network Scan”: Performs a scan in the

transponders of a network (aka NIT scan).

Since “Network Scan” is faster than “Full

Scan”, it is recommended when tuning to a

known network (normally associated with

the satellite). A transponder must be

specified, from which network information

(other transponders) will be retrieved.

Previously – tuned programmes will be

lost.

“Manual Scan”: Performs a scan

manually.

3 “LNB Configuration”:

For “Fixed Antenna or DiSEqC”:

In the case of a non-standard LNB (low

noise block), manual setting is available.

– In the case of a single satellite, you can

leave it on the initial setting.

– For two satellites, you can set “Toneburst

A” (1st satellite) and “Toneburst B” (2nd

satellite) in the “DiSEqC Control” setting.

– Or you can use DiSEqC command A (1st

satellite) and B (2nd satellite), if your LNB

or multi switch can handle these

commands.

– For four satellites, DiSEqC control A, B, C,

and D is required.

“LNB Low Band Frequency” and

“LNB High Band Frequency”:

– Specifies LNB frequency bands. Be sure

to check your LNB documentation to set

frequencies (normally appears as “L.O.

frequency”).

– The default values are for Universal LNB.

– If your LNB can handle both bands (low

and high), you can specify both. If it

handles only one, specify low band.

“22 kHz Tone”: If your LNB is dual band

(low and high bands) or Universal LNB,

set to “Auto”. The TV will take care of

everything automatically; otherwise, set

to “Off”.

“LNB Voltage”: Specifies the set

voltage for a dual polarization LNB.

– 13/18V: default.

– 14/19V: if LNB cable is over 60m long.

– Off: if an external power supply can be

used. (It should not be off typically).

For “Single Cable Distribution”:

– To control the satellites, you can set “A”

(1st group of satellites) or “B” (2nd group

of satellites) in the “Single Cable Control”

setting.

“LNB Low Band Frequency” and

“LNB High Band Frequency”:

– Specifies LNB frequency bands. Be sure

to check your LNB documentation to set

frequencies (normally appears as “L.O.

frequency”).

– The default values are for Universal LNB.

– If your LNB can handle both bands (low

and high), you can specify both. If it

handles only one, specify low band.

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KD-84X9005 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info