Bedienungsanleitung Sony KD-84X9005 (Seite 18 von 784) (Englisch, Französisch, Spanisch)

525760

Zoom out

Zoom in

Vorherige Seite

1/784

Nächste Seite

4 “Transponder”

There is no need to set the transponder

when you select “Full Scan”.

“Scan for new services”:

– Tunes to a single transponder.

– This is an incremental scan, and it should

be used in cases when a new transponder

is added to a satellite.

– Previously – tuned programmes are kept

and found ones are added to the program

list of the satellite connection you are

editing.

1 Press HOME, then select >

“Digital Set-up” > “Satellite Auto

Tuning”.

2 Follow the instruction on the Satellite

Auto Tuning.

• “Scan for new services” is unavailable

while performing the initial set-up.

• When you scan for the new services,

please check if the satellite signal is

available.

Digital Auto Tuning:

“Antenna” or “Cable”:

Select “Antenna” to receive terrestrial TV

broadcasting by an external antenna.

Select “Cable” if you are a Cable TV

subscriber not using an external Set-Top

Box. When you select “Cable”, we

recommend that you select “Quick Scan”

for quick tuning. Set “Frequency” and

“Network ID” according to the information

supplied from your cable provider. If no

channel is found using “Quick Scan”, try

“Full Scan” (though it may take some time).

• In some countries, you may select

“Antenna” instead of “Cable” to receive

Cable TV programmes.

• “Full Scan” may not be available

depending on your region/country.

Programme Sorting: Changes the order

of analogue channels stored in the TV.

1 Press F/f to select the channel you

want to move to a new position, then

press .

2 Press F/f to select the new position for

the channel, then press .

• For satellite channels, select “Satellite

Programme Sorting” in “Digital Set-up” of

“Settings” to change the order of satellite

channels in the same procedure above

after initial set-up completed.

• You can also tune channels manually.

Network Set-up: Sets up the Internet

settings. Select “Auto” to connect to the

network automatically. Select “Custom” to

connect manually.

If you do not access the Internet, or to set

up later, select “Skip”.

• If you use WEP security, select “Custom”

t “Wireless Set-up” t “Scan”. Then,

select the network name (SSID) you want to

connect. If you cannot find the required

network name, select “[Manual Entry]” and

press to enter network name.

• Use the optional USB Wireless LAN

Adapter to connect with your wireless

router (or access point) at 5GHz. Insert

USB Wireless LAN Adapter and set

“Standby for Wi-Fi Direct” to “Off”. Press

HOME, then select “Settings” t “Network”

t “Standby for Wi-Fi Direct” t “Off”.

• To set “Network Set-up” later, press HOME,

then select “Settings” t “Network” t

“Network Set-up”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony KD-84X9005 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info