Bedienungsanleitung Sony MDS-S37 (Seite 14 von 36) (Holländisch)

40280

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Recording on MDs

Synchro-Recording With a Sony

CD Player

By connecting your deck to a Sony CD player or Hi-Fi

Component System, you can easily dub CDs onto MDs

using the CD synchro buttons on the remote. If your

deck is connected to a Sony CD player by a digital

input cable, track numbers are automatically marked

as appear on the original regardless of whether

“LevelSync ON” or “LevelSyncOFF” is selected. If

your deck is connected to a Sony CD player by audio

connecting cords through LINE (ANALOG) IN, track

numbers are automatically marked when you select

“LevelSync ON” (see “Marking Track Numbers While

Recording” on page 12).

As the same remote controls both the CD player and

the deck, you may have trouble operating both units if

they are far from each other. If you do, place the CD

player close to this deck.

1 Set the source selector on the amplifier to CD.

2 Do Steps 2 to 5 in “Recording on an MD” on page

6 to prepare the deck for recording.

3 Insert a CD into the CD player.

4 Select the playback mode (Shuffle Play, Program

Play, etc.) on the CD player.

5 Press STANDBY.

The CD player pauses for playing and the deck

pauses for recording.

6 Press START.

The deck starts recording and the CD player starts

playback.

The track number and elapsed recording time of

the track appear in the display.

If the CD player does not start playing

Some CD player models may not respond when you

press START on the remote of the deck. Press P on the

remote of the CD player instead.

7 Press STOP to stop synchro-recording.

To pause recording

Press STANDBY or CD PLAYER P.

To restart recording, press START or CD PLAYER P.

A new track number is marked each time you pause

recording.

You can use the remote of the CD player during

synchro-recording

When you press p, the CD player stops and the deck

pauses for recording.

When you press P, the CD player pauses and the deck

pauses for recording.

To restart synchro-recording, press ·.

You can change CDs during synchro-recording

Do the following steps instead of Step 7 above.

1 Press p on the remote of the CD player.

The deck pauses for recording.

2 Change the CD.

3 Press · on the remote of the CD player.

Synchro-recording restarts.

You can also do synchro-recording with a Sony video

CD player

Using the procedure for synchro-recording with a Sony

CD player, you can do synchro-recording with a Sony

video CD player also.

To select the video CD player, press button number 2

while pressing down the POWER button before starting

the procedure.

To select the CD player again, press button number 1

while pressing down the POWER button.

The deck is factory set to a CD player for synchro-

recording.

You can check the remaining recordable time on the

Press DISPLAY (see page 15).

+=P

pP·

STOP

CD PLAYER P

START

STANDBY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MDS-S37 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info