Bedienungsanleitung Sony minidisc player mds je480 b (Seite 19 von 31) (Englisch)

157194

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Editing Recorded MDs

lename[E:\SEM_Janet\Revision

ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-14(1)]

masterpage:Left

(3 column)

4 While monitoring the sound, press

PUSH ENTER or YES at the starting

point of the portion to be erased (point

A).

“-Rehearsal-” and “Point A ok?” alternate in

the display and the deck repeatedly plays a

few seconds of the track before the point A.

5 Press PUSH ENTER or YES again if

point A is correct.

“Point B set” appears in the display and

playback for setting the ending point of the

portion to be erased (point B) starts.

If point A is not correct, adjust point A by

turning AMS (or by pressing ./>

repeatedly) while monitoring the sound , and

then press PUSH ENTER or YES when you

locate the desired starting point. You can

shift the point by 1-frame

intervals

(1 frame = 1/86 second).

6 Continue playing the track or press M

to locate the ending point of the portion

to be erased (point B), then press PUSH

ENTER or YES.

“A-B Ers” and “Point B ok?” alternate in the

display and a few seconds of the track before

point A and after point B play back

repeatedly.

7 Press PUSH ENTER or YES again if

point B is correct.

“Complete!” appears in the display for a few

seconds and then the portion between point

A and point B is erased.

If point B is not correct, adjust point B by

turning AMS (or by pressing ./>

repeatedly) while monitoring the sound, and

then press PUSH ENTER or YES when you

locate the desired ending point. You can

shift the point by 1-frame

intervals

(1 frame = 1/86 second).

2) You can shift the point by 2-frame intervals on

the track recorded in Monaural mode or LP2

Stereo mode, and by 4-frame intervals on the

track recorded in LP4 Stereo mode.

Tip

In step 5 and 7, if you want to shift point A or point B

by a certain number of seconds or minutes, press

m/M repeatedly. You can change the unit by

which the counter advances when you turn AMS (or

press ./> repeatedly).

Note

If “Impossible” appears in the display, you cannot

erase a portion of a track. This happens when you have

edited the same track many times.

This is due to a technical limitation of the MD system

and is not a mechanical error.

You can use this function to mark track

numbers after recording. The total number of

tracks increases by one and all the tracks

following the divided ones are renumbered.

Example: Dividing track 2 into two tracks.

Dividing a track after

selecting the track

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “Divide?” appears,

then press PUSH ENTER or YES.

Play starts.

3 Turn AMS (or press ./>

repeatedly) until the number of the track

you want to divide appears

4 While monitoring the sound, press

PUSH ENTER or YES at the dividing

point.

“-Rehearsal-” appears in the display and the

deck repeatedly plays a few seconds of the

track before the dividing point.

Dividing recorded tracks

— Divide Function

continued

12 3

123 4

AB C D

Tr ack

number

Original

tracks

After

DIVIDE

Divide track 2 into

track B and C

GB02REG-CEL.book Page 19 Wednesday, July 13, 2005 2:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony minidisc player mds je480 b Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info