Bedienungsanleitung Sony minidisc player mds je480 b (Seite 20 von 31) (Englisch)

157194

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

masterpage:Left

(3 column)

lename[E:\SEM_Janet\Revision

ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-14(1)]

Dividing recorded tracks (continued)

5 Press PUSH ENTER or YES again if the

dividing point is correct.

“Complete!” appears and the deck starts to

play the newly created track. Note that new

track has no name. If the dividing point is

not correct, adjust the point by turning AMS

(or press ./> repeatedly) while

monitoring the sound, and then press PUSH

ENTER or YES when you locate the desired

dividing point. You can shift the point by 1-

frame

intervals (1 frame = 1/86 second).

1) You can shift the point by 2-frame intervals

on the track recorded in Monaural mode or

LP2 Stereo mode, and by 4-frame intervals

on the track recorded in LP4 Stereo mode.

Tip

In step 5, if you want to shift the dividing point by a

certain number of seconds or minutes, press m/M

repeatedly. You can change the unit by which the

counter advances when you turn AMS (or press

./> repeatedly).

You can use this function to combine 2 tracks

into a single track. The total number of tracks

decreases by one and all tracks following the

combined ones are renumbered.

You can also use this function to erase

unnecessary track numbers.

Example: Combining track 3 to track 1.

Example: Combining track 1 to track 4.

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “Combine?” appears,

then press PUSH ENTER or YES.

3 Turn AMS (or press ./>

repeatedly) until the number of the first

track of the two tracks to be combined

appears, then press PUSH ENTER or

YES.

The display for selecting a second track

appears and the deck plays the portion

where joining will occur (the end of the first

track and the beginning of the second track

following it) repeatedly.

4 Turn AMS (or press ./>

repeatedly) until the number of the

second track of the two tracks to be

combined appears, then press PUSH

ENTER or YES.

“Complete!” appears and the deck starts to

play the combined track.

Notes

• Tracks recorded in different modes (stereo, MONO,

LP2 or LP4) cannot be combined.

• If both of the combined tracks have a track name,

the name of the second track is erased.

• If “Impossible” appears in the display, the tracks

cannot be combined because repeated editing has

been done to the track(s). This is a technical

limitation of the MD system and is not a mechanical

error.

Combining recorded

tracks

— Combine Function

ACBD

BC D

Tr ack

number

Original

tracks

After

COMBINE

BC D A

BC D

Original

tracks

After

COMBINE

GB02REG-CEL.book Page 20 Wednesday, July 13, 2005 2:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony minidisc player mds je480 b Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info