Bedienungsanleitung Sony minidisc player mds je480 b (Seite 22 von 31) (Englisch)

157194

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

masterpage:Left

(3 column)

lename[E:\SEM_Janet\Revision

ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-14(1)]

Naming a track or an MD (continued)

7 Repeat steps 4 to 6 to enter the rest of

the name.

To change a character

Press m/M repeatedly until the

character to be changed flashes, then repeat

steps 4 to 6.

To erase a character

Press m/M repeatedly until the

character to be erased flashes, then press

CLEAR.

8 Press YES.

The whole name appears in the display,

followed by “

Complete!”.

Naming a track or an MD

using the remote

1 Press NAME EDIT/SELECT depending

on what you want to name:

A flashing cursor appears in the display.

2 Press NAME EDIT/SELECT repeatedly

to select the character type.

Each time you press the button, the display

changes cyclically as follows:

“Selected AB” (Upper cases or symbols

)

t “Selected ab” (Lower cases or

symbols

) t “Selected 12” (Numbers)

1) Only ’ – / , . ( ) : ! ? can be selected.

3 Enter a character using letter/number

buttons.

If you have selected upper cases or

lower cases

1 Press the corresponding letter/number

button repeatedly until the character to

be entered flashes.

Or, press the button once and press

./> repeatedly.

To select symbols, press .

repeatedly while “A” is flashing.

2 Press M.

The flashing character is entered and

lights continuously and the cursor shifts

to the right.

If you have selected numbers

Press the corresponding number button.

The number is entered and the cursor shifts

to the right.

4 Repeat steps 2 and 3 to enter the rest of

the name.

To change a character

Press m/M repeatedly until the

character to be changed flashes, press

CLEAR to erase the character, then repeat

steps 2 and 3.

5 Press YES.

The whole name appears in the display,

followed by “Complete!”.

Renaming a track or an MD

1 Press NAME EDIT/SELECT on the

remote depending on what you want to

rename:

A track or disc name appears in the display.

2 Press CLEAR until the selected name is

erased completely.

3 Do steps 4 to 7 of “Naming a track or an

MD using the controls on the deck” on

page 21 or steps 2 to 4 of “Naming a

track or an MD using the remote” on

this page.

4 Press YES.

The whole name appears in the display,

followed by “Complete!”.

Erasing a track or disc name

Use this function to erase the name of a track or

disc.

1 While the deck is stopped, playing,

recording, or paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “Nm Erase?” appears,

then press PUSH ENTER or YES.

To name Press while

A track The track number is displayed

The MD The deck is stopped with the total

number of tracks displayed

To rename Press while

A track The track number is displayed

The MD The deck is stopped with the total

number of tracks displayed

GB02REG-CEL.book Page 22 Wednesday, July 13, 2005 2:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony minidisc player mds je480 b Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info