Bedienungsanleitung Sony minidisc player mds je480 b (Seite 23 von 31) (Englisch)

157194

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Editing Recorded MDs

lename[E:\SEM_Janet\Revision

ata\J9050000_4238553141MDSJE480CEL\4238553141\GB05OPE-CEL.fm]

model name1[MDS-JE480]

[4-238-553-14(1)]

masterpage:Left

(3 column)

3 Turn AMS (or press ./>

repeatedly) until the number of the track

(when erasing the track name) or “Disc”

(when erasing the disc name) flashes,

then press PUSH ENTER or YES.

“Complete!” appears.

You can change the volume of recorded tracks

using S.F (Scale Factor) Edit. The original track

is recorded over at the new recording level.

When changing the recording level, you can

select Fade-in Recording to gradually increase

the signal level at the start of recording, or

Fade-out Recording to gradually decrease the

signal level at the end of recording.

Changing the overall

recording level

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “S.F Edit?” appears,

then press PUSH ENTER or YES.

3 Turn AMS (or press ./>

repeatedly) until “Tr Level?” appears,

then press PUSH ENTER or YES.

4 Turn AMS (or press ./>

repeatedly) until the track number you

want to change the recording level

appears, then press PUSH ENTER or

YES.

5 While monitoring the sound, turn AMS

(or press ./> repeatedly) to

change the recorded level without

turning on the “OVER” indicators on the

peak level meters.

6 Press PUSH ENTER or YES.

“(S.F) Edit OK?” appears in the display.

7 Press PUSH ENTER or YES again.

The deck starts recording over the existing

track. “S.F Edit(:) ** %” appears while the

track is being recorded. When recording

over the track, the amount of time required

is roughly equal to or longer than the

playback time of the track. When the

recording finishes, “Complete!” appears.

Fade-in and Fade-out

Recording

1 While the deck is stopped, playing, or

paused, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn AMS (or press ./>

repeatedly) until “S.F Edit?” appears,

then press PUSH ENTER or YES.

3 Turn AMS (or press ./>

repeatedly) until “Fade In?” or “Fade

Out?” appears, then press PUSH

ENTER or YES.

4 Turn AMS (or press ./>

repeatedly) until the track number you

want to change the recording level

appears, then press PUSH ENTER or

YES.

“Time 5.0s” appears in the display.

5 While monitoring the sound, turn AMS

(or press ./> repeatedly) to

change the Fade-in or Fade-out

Recording time.

The deck plays the portion that will be

recorded over using Fade-in or Fade-out

Recording.

You can set the time at any value between

1 second and 15 seconds, in 0.1 second

increments. You cannot set the time longer

than the track.

6 Press PUSH ENTER or YES.

“(S.F) Edit OK?” appears in the display.

7 Press PUSH ENTER or YES again.

The deck starts recording over the existing

track. “S.F Edit(:) ** %” appears while the

track is being recorded. When the recording

finishes, “Complete!” appears.

Changing the recorded

level after recording

— S.F EDIT

Avoid turning on these indicators

continued

GB02REG-CEL.book Page 23 Wednesday, July 13, 2005 2:56 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony minidisc player mds je480 b Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info