Bedienungsanleitung Sony MZM10 (Seite 60 von 115) (Englisch)

23374

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Using the recorder with a computer

What you can do

through connection

with a computer

To use the recorder connected to a

computer, you must install the software

from the supplied CD-ROM. For details

on the installation procedure, refer to the

“Software Operation” (page 86) section

(if you are using Windows) or the “Hi-

MD WAV Importer for Mac” operating

instructions (if you are using Macintosh).

When using the supplied

software

• SonicStage for Windows

The SonicStage software enables you to

transfer audio data between the recorder

and the computer. When a disc used in

Hi-MD mode is inserted in the recorder,

tracks recorded with a microphone or

from a CD player to the recorder can

also be migrated to your computer. (See

the “Software Operation” section or

online help.)

• MD Simple Burner for Windows

The MD Simple Burner software

enables you to record a CD in the

computer’s CD drive directly to a disc in

the recorder. (See the “Software

Operation” section.)

• Hi-MD WAV Importer for Macintosh

The Hi-MD WAV Importer software

enables you to import audio data

recorded in linearPCM on the recorder

to a Macintosh computer. (See the

supplied “Hi-MD WAV Importer for

Mac” operating instructions.)

When using the disc in the

recorder as a storage device

When a disc used in Hi-MD mode is

inserted in the recorder, the recorder

appears on the computer display as an

external drive, allowing you to transfer

non-audio data such as text and image

files. For details, refer to “Storing non-

audio data to a disc” (page 62).

If you play audio files using the SonicStage

software, the sound is output from the computer

speakers when a disc used in Hi-MD mode is

inserted, and from the earphones connected to

the recorder when a disc used in MD mode is

inserted in the recorder.

Charging the rechargeable

battery of the recorder

You can charge the rechargeable battery

while the recorder is connected to a

computer (using USB bus power).

When you connect the recorder to the

computer, power (bus power) from the

computer begins to charge the recorder’s

rechargeable battery. However, this

charge is only provisional and cannot be

used to fully charge the rechargeable

battery. For example, if you charge a

completely drained rechargeable battery

in this way, the recorder will stop

charging after about 6 hours when the

battery level is between half and full

charge. The charging time may vary

according to the condition of the

rechargeable battery and the surrounding

temperature.

Charging by USB bus power charge is not

possible when the battery level indication

( ) is flashing in the display.

• Reinsert the rechargeable battery and close the

battery compartment lid firmly.

• The temperature of the battery-charging

location is too low or too high. The

rechargeable battery should be charged within

a temperature range of +5°C (+41°F) to

+35°C (+95°F).

Note

You can check the USB bus power

charging with the battery indication.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MZM10 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info