Bedienungsanleitung Sony MZM10 (Seite 62 von 115) (Englisch)

23374

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

4 Unplug the USB cable from the

computer or remove the disc from the

recorder.

• If you use the recorder connected to the

computer, it is recommended that you insert a

fully charged rechargeable battery as a

precaution against power failures,

disconnection of the USB cable or other

unforeseen occurrences. We do not assure the

results should there be a mis-operation,

transfer failures, or destruction of audio data

caused by unforeseen occurrences.

• If you disconnect the USB cable from the

recorder and want to reconnect it, make sure

to wait at least 2 seconds before connecting it

again.

• Make sure to place the recorder at a stable,

vibration-free place during recording.

• Make sure not to connect the recorder to your

computer during recording or playing.

• Make sure to turn off any system suspend,

sleep, or hibernation function that may be

active on your computer. If the computer

changes to any of these modes while

connecting with the recorder, a malfunction

may occur; for example, the computer may

not recognize the recorder. If this happens,

reconnect the USB cable.

• Make sure not to connect the recorder and the

computer through a USB hub.

• When the recorder is connected to a computer,

power (bus power) is supplied to the recorder

through the computer’s USB port. If the

computer (a laptop PC, for example) is

operating on battery power, this connection

may cause the computer’s battery to drain. It

is thus recommended to use the computer with

an AC power adaptor.

• We do not ensure trouble-free operation on all

computers that satisfy the system

requirements.

Storing non-audio data

to a disc

If you connect the recorder to a computer

with a disc in Hi-MD mode inserted, the

disc is recognized as storage media by the

computer, allowing you to store non-

audio data such as text data or image data.

For the storage space for each disc, refer

to the next page.

When you insert a disc in Hi-MD mode

into the recorder and make connection

with the computer, the recorder is

recognized as an external device and can

be viewed on the computer display. You

can use the recorder in the same way as

other devices.

You can view non-audio data stored on a disc in

the display window of the recorder. For details,

refer to “Viewing non-audio data stored on the

disc in the display window of the recorder (File

List)” (page 63).

• When the SonicStage software is active, the

recorder is not recognized as a data storage

device.

• To format a disc on the computer, follow the

instructions below.

—If you are using a Windows computer,

format the disc with the SonicStage

software.

—If you are using a Macintosh computer, you

cannot format a disc on the computer.

Format the disc on the recorder (page 55).

• Make sure not to delete the file management

folder (HMDHIFI folder and HI-MD.IND

file) on the computer.

Notes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony MZM10 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info