Bedienungsanleitung Sony RDR-GX7 (Seite 26 von 96) (Englisch)

21255

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Timer Recording

c Press Z, and place a recordable disc on the

disc tray.

d Press Z to close the disc tray.

Wait until “LOAD” disappears from the front panel

display.

If you use an unused DVD, formatting starts

automatically.

When using an unused DVD-RW, select the

recording format, VR or Video.

e Press [TIMER].

The Timer programming (Standard) menu appears.

If the Timer programming (ShowView) menu

appears, press < to switch the display.

f Set the following items using </M/m/,.

A Press M/m to set the date, then press ,.

Each time you press M/m, the item changes as

follows.

Today y Tomorrow y …… y Tue 28.10

(1 month later) y Sun (every Sunday) y ……

y Sat (every Saturday) y Mon-Fri (Monday

to Friday) y Mon-Sat (Monday to Saturday)

y Sun-Sat (Sunday to Saturday) y Today

B Press M/m to set the start time, then press ,.

C Press M/m to set the stop time, then press ,.

D Press M/m to set the programme position, then

press ,.

When you set the timer for recording from

connected equipment, select “Line1,” “Line2,”

“Line3,” or “Line4.”

E Press M/m to select the recording mode (HQ,

HSP, SP, LP, EP, or SLP), then press ,.

F Press M/m to set the PDC/VPS function “On”

or “Off.”

See “About the PDC/VPS function” below for

more information.

◆ If you make a mistake

Press </, to select the item you want to change.

◆ To exit without saving the current setting

Press </M/m/, to select “Cancel,” then press

ENTER.

g Press </M/m/, to select “OK,” then press

ENTER.

The Timer List menu appears. The TIMER REC

indicator lights up on the front panel and the recorder

is ready to start recording.

h Press RETURN to turn off the Timer List, or

press [TIMER] and repeat from step 5 to

enter additional timer settings.

Unlike a VCR, there is no need to turn off the

recorder before the timer recording starts.

To stop recording during timer recording

Press x REC STOP.

To confirm, change, or cancel timer recording

See “Checking/changing/cancelling timer settings (Timer List)”

(page 28).

z Hints

• For recording over the next day, leave the starting date setting as it is,

and enter the ending time in the setting. The date will automatically

change to the next day.

• You can also display the timer programming menu by:

– selecting “TIMER” from the System Menu.

– selecting “Timer” from the Tool menu while the Timer List menu is

displayed (page 17).

• You can also use the recorder even when the recorder stands by for

recording. To remind you of the timer setting, a message appears on

your TV screen five minutes before the timer recording starts.

Notes

• If “The disc is full or nearly full” appears on the screen, change the

disc, or make available space for the recording (DVD-RW/DVD+RW

only).

• Check that the clock is correctly set before setting the timer recording.

If not, the timer recording cannot be made.

To record a satellite programme, turn on the satellite tuner and select

the satellite programme you want to record. Leave the satellite tuner

turned on until the recorder finishes recording. If you connect

equipment with a timer function, you can use the Synchro Rec function

(page 31).

About the PDC/VPS function

PDC/VPS signals are transmitted with TV programmes in some

broadcast systems. These signals ensure that timer recordings

are made regardless of any broadcast delays, early starts, or

broadcast interruptions.

To use the PDC/VPS function, set “PDC/VPS” to “On” in step 6

above.

When you turn on this function, the recorder starts scanning the

channel before the timer recording starts. If you are watching TV

when scanning starts, a message will appear on the TV screen. If

you want to watch TV, switch to your TV’s tuner or turn off the

PDC/VPS channel scan function.

◆ To turn off the PDC/VPS channel scan function

A Press TOOL.

B Press M/m to select “PDC/VPS Scan Off.”

To ensure that the PDC/VPS function works properly, turn off

the recorder before the timer recording starts. This will

automatically turn on the PDC/VPS channel scan function while

the recorder remains off.

Timer - Standard

Set the timer manually.

Date

ShowView

Today

Start Prog. Mode

VPS

PDC

Stop

Cancel

Timer - Standard

Set the timer manually.

Date

ShowView

Tomorrow 20

Start Prog. Mode

VPS

PDC

00: 20

Stop

30: SP OnAAB

Cancel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX7 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info