Bedienungsanleitung Sony RDR-GX7 (Seite 27 von 96) (Englisch)

21255

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Timer Recording

Recording/Timer Recording

Notes

• The beginning of some recordings may not be made when using the

PDC/VPS function.

• Select “PDC/VPS Scan Off” when dubbing or editing a DV/Digital8

format tape. When finished, select “PDC/VPS Scan On” so that the

timer recordings will be made.

To display the timer programming menu

automatically with one button (One Touch

Timer) (for SCART connections only)

If you use the SMART LINK connection, you can easily display

the timer programming menu by pressing just the [TIMER]

button.

Press [TIMER] while a disc is in the recorder.

The TV and recorder turn on and the TV’s input is switched to

the recorder. The Timer programming menu appears.

Note

When you use this function, leave the TV on, or in the standby mode.

Rec Mode Adjust

If there is not enough available disc space for the recording, the

recorder automatically selects the recording mode to enable the

programme to be recorded. This function is normally set to on.

◆To cancel the function

A Press TOOL while the Timer List is displayed.

B Press M/m to select “Rec Mode Adjust,” then press

ENTER.

C Press </, to select “Off,” then press ENTER.

Note

This function only works with a timer recording and the PDC/VPS

function set to off. It does not function with Quick Timer or Synchro

Rec.

To extend the recording duration time

You can extend the recording duration while recording.

1 Press TOOL during recording.

2 Press M/m to select “Extend Rec,” then press

ENTER.

The following display appears.

3 Press M/m to select the duration time, then press

ENTER.

You can set the duration in increments of 10 minutes,

up to 60 minutes.

4 Press </M/m/, to select “OK,” then press

ENTER.

z Hint

You can also extend the recording duration time using “Extend Rec” in

the sub-menu of the Timer List.

Note

You cannot extend the recording duration time when “PDC/VPS” is set

to “On.”

If the timer settings overlap

The following display appears.

To store the setting, press </, to select “OK,” then press

ENTER.

To cancel or change the setting, select “Cancel.” When the

Timer List menu appears, change or cancel the setting (page 28).

◆When the timer settings overlap

The programme that starts first has priority and the second

programme starts recording only after the first programme has

finished.

◆When the recordings start at the same time

The programme that is set last has priority. In this example, timer

setting B is set after A, so the first part of timer setting A will not

be recorded.

◆When the end time of one recording and the start time of

another are the same

After finishing the previous recording, the other recording may

be delayed.

Note

When “PDC/VPS” is set to “On” for one or more timer recordings, the

start times may change in the event of a broadcast delay or early start.

Extend Rec. Time

Set the timer extend function.

Sun 28.9 10:00-11:30 AAB SP

Cancel

Extend Time

Off

Wed 29.10 21:00-22:00 AAB SP

Wed 29.10 20:30-21:00 DEF SP

Timer

These timer settings overlap. Do you want to save this setting?

Cancel

7:00 8:00 9:00 10:00

Timer setting A

Timer setting B

will be cut off

7:00 8:00 9:00 10:00

Timer setting A

Timer setting B

7:00 8:00 9:00 10:00

Timer setting A

Timer setting B

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDR-GX7 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDR-GX7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info