Bedienungsanleitung Sony RDRHX1010 (Seite 90 von 116) (Englisch)

21299

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Audio Settings (Audio)

The “Audio” setup allows you to adjust the sound

according to the playback and connection

conditions.

1 Press SYSTEM MENU while the recorder is

in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Audio,” and press ENTER.

The “Audio” setup appears with the following

options. The default settings are underlined.

Audio ATT (attenuation)

If the playback sound is distorted, set this item to

“On.” The recorder reduces the audio output level.

This function affects the output of the following

jacks:

– LINE 2 OUT R-AUDIO-L jacks

–LINE 1 – TV jack

– LINE 3/DECODER jack

Audio DRC (Dynamic Range Control) (DVDs

only)

Makes the sound clear when the volume is turned

down when playing a DVD that conforms to

“Audio DRC.” This affects the output from the

following jacks:

– LINE 2 OUT R-AUDIO-L jacks

–LINE 1 – TV jack

– LINE 3/DECODER jack

– DIGITAL OUT (OPTICAL or COAXIAL)/

HDMI OUT jack only when “Dolby Digital” is

set to “D-PCM” (page 91).

Downmix (DVDs only)

Switches the method for mixing down to two

channels when you play a DVD which has rear

sound elements (channels) or is recorded in Dolby

Digital format. For details on the rear signal

components, see “4. Displaying the Playing Time

and Play Information” on page 34. This function

affects the output of the following jacks:

– LINE 2 OUT R-AUDIO-L jacks

– LINE 1 – TV jack

– LINE 3/DECODER jack

– DIGITAL OUT (OPTICAL or COAXIAL)/

HDMI OUT jack when “Dolby Digital” is set to

“D-PCM” (page 91).

Audio Connection

The following setup items switch the method of

outputting audio signals when you connect a

component such as an amplifier (receiver) with a

digital input jack.

For connection details, see “Step 4: Connecting

the Audio Cords” on page 17.

Select “Dolby Digital,” “MPEG,” “DTS,”

“48kHz/96kHz PCM,” and “Audio(HDMI)” after

setting “Digital Out” to “On.”

If you connect a component that does not accept

the selected audio signal, a loud noise (or no

sound) will come out from the speakers, and may

affect your ears or cause speaker damage.

On Select this when the playback

sound from the speakers is

distorted.

Off

Normally select this position.

SETUP

OffAudio ATT :

Easy Setup

Settings

Options

Features

Audio

Video

Audio Connection

Downmix :

Audio DRC :

Dolby Surround

Standard

Standard Normally select this position.

TV Mode Makes low sounds clear even if

you turn the volume down.

Wide

Range

Gives you the feeling of being at a

live performance.

Dolby

Surround

Normally select this position.

Multi-channel audio signals are

output to two channels for

enjoying surround sounds.

Normal Multi-channel audio signals are

downmixed to two channels for

use with your stereo.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX1010 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX1010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info