Bedienungsanleitung Sony RDRHX1010 (Seite 91 von 116) (Englisch)

21299

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Settings and Adjustments

1 Select “Audio Connection” in “Audio,” and

press ENTER.

2 Select “Digital Out,” and press ENTER.

3 Select “On,” and press ENTER.

4 Set the digital output signal.

• Dolby Digital (HDD/DVDs only)

Selects the type of Dolby Digital signal.

b Note

If the HDMI OUT jack is connected to equipment not

compatible with DOLBY DIGITAL signals, the

“D-PCM” signals will be automatically output even

when you select “Dolby Digital.”

• MPEG (DVD VIDEO only)

Selects the type of MPEG audio signal.

b Note

If the HDMI OUT jack is connected to equipment not

compatible with MPEG audio signals, the “PCM” signals

will be automatically output even when you select

“MPEG.”

• DTS (DVD VIDEO only)

Selects whether or not to output DTS signals.

b Note

When HDMI output is performed to equipment not

compatible with DTS signals, the signals will not be

output regardless of the “DTS” setting.

• 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

b Notes

• “48kHz/96kHz PCM” setting has no effect when audio

signals are output from the LINE 2 OUT (R-AUDIO-

L) jacks. If the sampling frequency is 96kHz, signals

are simply converted to 96kHz analog signals and

output.

• When you use the DIGITAL OUT (COAXIAL or

OPTICAL) jack to listen to MPEG audio signals and

set “MPEG” to “MPEG” in “Audio” setup, no sound

will come from your speakers if you select one of the

TVS modes.

• If the HDMI OUT jack is connected to equipment not

compatible with 96 kHz signals, 48 kHz PCM will be

automatically output even when you select “96kHz/

24bit.”

On Normally select this position.

Off The influence of the digital

circuit upon the analogue

circuit is minimal.

D-PCM

Select this when the recorder is

connected to an audio component

lacking a built-in Dolby Digital

decoder. The surround effects of

output signals are determined by

the “Downmix” setting item in

“Audio” setup.

Dolby

Digital

Select this when the recorder is

connected to an audio component

with a built-in Dolby Digital

decoder.

PCM

Select this when the recorder is

connected to an audio component

without a built-in MPEG decoder.

If you play MPEG audio sound

tracks, the recorder outputs stereo

signals via the DIGITAL OUT

(COAXIAL or OPTICAL) jack.

MPEG Select this when the recorder is

connected to an audio component

with a built-in MPEG decoder.

Audio - Audio Connection

Digital Out : On

MPEG :

Dolby Digital :

PCM

D-PCM

DTS : Off

48kHz/96kHz PCM : 48kHz/16bit

Audio(HDMI) : Auto

On Select this when the recorder is

connected to an audio component

with a built-in DTS decoder.

Off

Select this when the recorder is

connected to an audio component

without a built-in DTS decoder.

48kHz/

16bit

The DVD video audio signal is

converted to 48kHz/16bit and

output.

96kHz/

24bit

All signals containing 96kHz/24bit

are output without conversion.

However, the signals are output at

48kHz/16bit if copyright-

protected signals are contained.

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RDRHX1010 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RDRHX1010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info