Bedienungsanleitung Sony RHT-G500 (Seite 34 von 40) (Englisch)

61906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

There is no picture on the TV screen.

• Check that the TV is selected correctly.

• Set the TV to the appropriate input mode.

Control for HDMI

The Control for HDMI function does not work.

• Check the HDMI connection (page 10).

• Make sure “CTRL: HDMI” is set to “ON” in

AMP menu.

• Make sure the connected component is

compatible with the Control for HDMI

function.

• Check the Control for HDMI settings on the

connected component. Refer to the

operating instructions supplied with the

connected component.

• If you change the HDMI connection, or

connect/disconnect the AC power cord

(main lead), or if there is a power failure,

repeat the procedures of “Preparing for the

“BRAVIA” Sync” (page 21).

• The system may not work correctly if you

select a component that is not compatible

with the Control for HDMI function on the

TV side.

• Make sure “DVD CTRL”, “SAT CTRL” or

“DMPORT. CTRL” is set to “ON” in AMP

menu. If the system input is selected for a

component whose “DVD CTRL,” “SAT

CTRL” or “DMPORT. CTRL” setting is

“OFF,” the Control for HDMI functions,

such as One-Touch Play, System Audio

Control, Volume Limit function, will not

work, even if the Control for HDMI function

setting of another component is set to on.

No sound is output from the system and the

TV’s speaker.

• Check the volume of the system and the TV.

• Select the input of the system correctly.

The sound is output from both the system and

the TV.

• If the Control for HDMI function is set to

off, or the selected component is not

compatible with the Control for HDMI

function, turn off the sound of the system or

the TV.

The System Power Off function does not work.

• Change the setting of the TV to turn

connected components off automatically

when you turn off the TV. For details, refer

to the operating instructions of the TV.

An image does not appear on the TV.

• Check whether HDMI IN and HDMI OUT

are connected correctly.

A message stating that the output method has

changed from the system speaker to the TV

speaker appears on the TV screen.

• The Control for HDMI function for the

selected component is set to off. For details,

refer to “Setting the Control for HDMI

function to off for a component without

HDMI jacks” (page 23).

Other

The remote does not function.

• Point the remote at the remote sensor on

the system.

• Remove any obstacles in the path between

the remote and the satellite speaker.

• Replace both batteries in the remote with

new ones, if they are weak.

• Make sure you select the correct input on the

remote.

The volume turns down when the output

method changes from the TV speaker to the

system speaker.

• The Volume Limit function is working. For

details, refer to “Using the Volume Limit

function” (page 25).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RHT-G500 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RHT-G500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info