Bedienungsanleitung Sony rm vl 600 t (Seite 28 von 36) (Englisch)

122744

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Troubleshooting

If you have problems setting up or using the Remote Commander, first check the batteries (page 6), then

check the items below.

Remedy

• Move closer to the component. The maximum operating distance is

approximately 10 m. (32.8 ft).

• Check that you are aiming the Commander directly at the component,

and that there are no obstructions between the Commander and the

component.

• Power on the components first, if necessary.

• Make sure you have pressed the correct Component Select button. In

case of MD or DAT, make sure the desired component is selected.

• Check that the component has infrared remote capability. For example,

if your component did not come with a remote commander, it probably

is not capable of being controlled by a remote commander.

• You have assigned a different component to the Component Select

button. Check the component assigned to that button and the

component code.

• If your visual components are connected to an audio system, make sure

you have set up the Commander as described in “Controlling the

Volume of Visual Components Connected to an Audio System” (page

19).

• You have assigned another component on the TV or AMP button (page

24). In this case, the volume cannot be controlled when you select

components other than a TV or AMP.

• Batteries are weakened.

Replace them with new ones.

• Set the component code correctly. If the code that is listed first for your

component does not work, try all the codes for your component in the

order in which they are listed in the supplied “Component code

numbers.”

• Some features may not be preset. If some or all of the buttons do not

function correctly even after you have set the component codes, then

use the Learning function to programme the remote control signals for

the component (page 12).

• The component may be operated with a code number that is not listed

in the “Component code numbers.” See “Setting a Component Code by

the Search Function” (page 10) and try setting a code number again

with the Search function.

• When you teach signals of an interactive signal exchange system

remote control unit (supplied with some of Sony’s amplifiers) to the

Commander, the response signal of the main unit may interfere with

the learning of the Commander. In such a case, move to a place where

the signals will not reach the main unit (e.g., another room, etc.).

• Make sure that the Remote Commander has “learned” the correct

signals. If not, see “For accurate Learning” (page 14) and try the

Learning procedure again (page 12).

• Learning has not succeeded. See “For accurate Learning” (page 14) and

try the Learning procedure again (page 12).

• There are no available buttons for “learning.” Clear infrequently used

Learned functions (page 16), then carry out learning procedure.

• The component codes cannot be set. See the supplied “Component code

numbers” and try setting the component codes again (page 8).

• A selected Component Select button or another button to be set has any

remote control signals programmed by Learning function (page 12).

Clear the “learned” signals (page 16) or select another button which has

no “learned” signals, and try setting again.

Symptom

You cannot operate components.

You cannot control the volume.

The Component Select buttons flash by a constant interval

when you press a button.

You cannot operate a component even after setting the

component code numbers.

The Commander fails to learn the remote control signals.

You cannot operate a component even after you

programmed the remote control signals with the Learning

function.

The SET indicator flashes five times during the Learning

procedure.

A Component Select button flashes five times during

setting.

The SET indicator flashes twice during the Learning

procedure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony rm vl 600 t Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony rm vl 600 t

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info