Bedienungsanleitung Sony STR-DN1080 (Seite 58 von 72) (Englisch)

699403

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Code 32, Code 33

 Sound is not detected from one or both of

the speakers.

 Sound is not detected from one or both of

the front speakers. Please ensure that the

calibration microphone is not damaged,

and is connected to the CALIBRATION MIC

jack on the front panel of the receiver, and

that all speakers are properly connected.

 Sound is not detected from either the left

or right surround speakers. Please ensure

that the surround speakers are connected

to the SURROUND terminals.

 The surround back speaker is connected

to the SURROUND BACK/HEIGHT R

terminal. When using only one surround

back speaker, please connect it to the

SURROUND BACK/HEIGHT L terminals.

 Only one height speaker is detected.

Please ensure that both the height

speakers are connected to the

SURROUND BACK/HEIGHT terminals.

 Sound is not detected from any speakers,

please ensure the calibration microphone is

not damaged and is connected to the

CALIBRATION MIC jack on the front panel of

the receiver.

Code 34

Speakers are not placed in the proper

position or the calibration microphone may

be reversed.

Code 35

The speaker pattern configuration does not

match calibration result. Please check the

speaker pattern and connection.

Warning 40

The measurement has been completed, but

the noise level is high. For best results,

calibrate in as quiet a place as possible.

Warning 41, Warning 42

The input signal from the calibration

microphone is too large. The microphone

may be too close to the speakers. Please

place the calibration microphone at your

desired listening position. Please note, when

using the receiver as a pre-amplifier, this

message may appear by mistake. Please

disregard.

Warning 43

The distance and phase of the subwoofer

cannot be detected. Please check the

subwoofer and re-calibrate in a quiet

environment.

Warning 44

The measurement has been completed, but

the speaker may need to be re-positioned.

Please see "Installing Speakers" in the Help

Guide.

Precautions

On safety

Should any solid object or liquid fall into the

cabinet, unplug the receiver and have it

checked by qualified personnel before

operating it any further.

On power sources

 Before operating the receiver, check that

the operating voltage is identical with your

local power supply.

The operating voltage is indicated on the

nameplate on the back of the receiver.

 If you are not going to use the receiver for a

long time, be sure to disconnect the

receiver from the wall outlet. To disconnect

the AC power cord (mains lead), grasp the

plug itself; never pull the cord.

 The AC power cord (mains lead) must be

changed only at a qualified service shop.

On heat buildup

Although the receiver heats up during

operation, this is not a malfunction. If you

continuously use this receiver at a large

volume, the cabinet temperature of the top,

side and bottom rises considerably. To avoid

burning yourself, do not touch the cabinet.

On placement

 Place the receiver in a location with

adequate ventilation to prevent heat

buildup and prolong the life of the receiver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DN1080 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-DN1080

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info