Bedienungsanleitung Sony STR-DN840 (Seite 108 von 140) (Englisch)

581035

108

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

108US

• When you want to listen to the sound

from the TV speaker, set the “HDMI

Audio Out” to “TV+AMP” in the

HDMI Settings menu (page 94). If you

cannot play back multi channel audio

source, set to “AMP”. However, the

sound will not output through the TV

speaker.

• Sound may be interrupted when the

sampling frequency, the number of

channels or audio format of audio

output signals from the playback

equipment is switched.

There is severe hum or noise.

• Check that the speakers and equipment

are connected securely.

• Check that the connecting cords are

away from a transformer or motor, and

at least 3 meters (10 feet) away from a

TV set or fluorescent light.

• Move your audio equipment away

from the TV.

• The plugs and jacks are dirty. Wipe

them with a cloth slightly moistened

with alcohol.

There is no sound, or only a very low-

level sound is heard from specific

speakers.

• Connect a pair of headphones to the

PHONES jack to verify that sound is

output from the headphones. If only

one channel is output from the

headphones, the equipment may not be

connected to the receiver correctly.

Check that all the cords are fully

inserted into the jacks on both the

receiver and the equipment.

If both channels are output from the

headphones, the front speaker may not

be connected to the receiver correctly.

Check the connection of the front

speaker which is not outputting any

sound.

• Make sure you have connected to both

the L and R jacks of an analog

equipment, analog equipment requires

both L and R jack connections. Use an

audio cord (not supplied).

• Adjust the speaker level (page 90).

• Check that the speaker settings are

appropriate for the setup using the

Auto Calibration menu or “Speaker

Pattern” in the Speaker Settings menu.

Then check that sound is output from

each speaker correctly, using “Test

Tone” in the Speaker Settings menu.

• Some discs have no Dolby Digital

Surround EX information.

• Check that the subwoofer is connected

correctly and securely.

• Make sure you have turned on your

subwoofer.

• Depending on the selected sound field,

no sound will be available from the

subwoofer.

• When all speakers are set to “Large”

and “Neo:6 Cinema” or “Neo:6

Music” is selected, there is no sound

from the subwoofer.

There is no sound from a specific

equipment.

• Check that the equipment is connected

correctly to the audio input jacks for

that equipment.

• Check that the cord(s) used for the

connection is (are) fully inserted into

the jacks on both the receiver and the

equipment.

• Check the INPUT MODE (page 83).

• Check that the equipment is connected

correctly to the HDMI jack for that

equipment.

• Depending on the playback

equipment, you may need to set up the

HDMI setting of the equipment. Refer

to the operating instructions supplied

with each equipment.

• Be sure to use a High Speed HDMI

cable when you view images or listen

to sound, especially for the 1080p,

Deep Color (Deep Colour), 4K or 3D

transmission.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DN840 Seite 108

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-DN840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info