Bedienungsanleitung Sony STR-DN840 (Seite 109 von 140) (Englisch)

581035

109

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

109US

Additional Information

• Sound may not be output from the

receiver while the OSD appears on the

TV screen. Press HOME to display the

home menu, then press HOME again.

• Audio signals (format, sampling

frequency, bit length, etc.) transmitted

from an HDMI jack may be suppressed

by the connected equipment. Check

the setup of the connected equipment if

the image is poor or the sound does not

come out of the equipment connected

via the HDMI cable.

• When the connected equipment is not

compatible with copyright protection

technology (HDCP), the image and/or

the sound from the HDMI TV OUT

jack may be distorted or may not be

output. If this is the case, check the

specification of the connected

equipment.

• Set the image resolution of the

playback equipment to more than

720p/1080i to enjoy High Bitrate

Audio (DTS-HD Master Audio, Dolby

TrueHD).

• The image resolution of the playback

equipment may need to be at certain

settings before you can enjoy DSD and

Multi Channel Linear PCM. Refer to

the operating instructions of the

playback equipment.

• Make sure the TV is compatible with

the System Audio Control function.

• If the TV does not have System Audio

Control function, set the “HDMI

Audio Out” settings in HDMI Settings

menu to

– “TV+AMP” if you want to listen to

the sound from the TV speaker and

receiver.

– “AMP” if you want to listen to the

sound from the receiver.

• When you connect the receiver to a

video equipment (projector, etc.),

sound may not be output from the

receiver. In this case, set the “HDMI

Audio Out” to “AMP” in the HDMI

Settings menu (page 94).

• If you cannot listen to the sound of the

equipment connected to the receiver

while TV input is selected on the

receiver

– Be sure to change the input of the

receiver to HDMI when you want to

watch a program on the equipment

connected via HDMI connection to

the receiver.

– Change the TV channel when you

want to watch a TV broadcast.

– Be sure to select the correct

equipment or input you want when

you watch a program from the

equipment connected to the TV.

Refer to the operating instructions of

the TV on this operation.

• When “Analog Direct” is being used,

the sound is not output. Use other

sound field (page 51).

• When using the Control for HDMI

function, you cannot control the

connected equipment using TV’s

remote control.

– Depending on the connected

equipment and TV, you may need to

set up the equipment and TV. Refer

to the operating instructions

supplied with each equipment and

TV.

– Change the input of the receiver to

the HDMI input connected to the

equipment.

• Check that the selected digital audio

input jack is not reassigned to other

inputs (page 83).

The left and right sounds are

unbalanced or reversed.

• Check that the speakers and equipment

are connected correctly and securely.

• Adjust the sound level parameters

using the Speaker Settings menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DN840 Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-DN840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info