Bedienungsanleitung Sony STR-DN840 (Seite 113 von 140) (Englisch)

581035

113

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

113US

Additional Information

• Check the settings of the wireless LAN

router/access point and do the setup

again. For details on the settings of the

devices, refer to the operating

instructions of the devices.

• Make sure that you use a wireless LAN

router/access point.

• Wireless networks are influenced by

electromagnetic radiation emitted by

microwave ovens and other devices.

Move the unit away from these

devices.

• Make sure that the wireless LAN

router/access point is turned on.

Cannot control the receiver using the

TV SideView device.

• The receiver may take a long time to

connect to the network after you turn

on the receiver. Wait for a few

moments, and then try using the TV

SideView again.

• Make sure “Network Standby” is set to

“On” in the Network Settings menu so

that you can use the TV SideView

immediately after you have turned on

the receiver.

Cannot select the Network Settings

menu.

• Wait for a few moments after you

turned on the receiver, and then select

the Network Settings menu again.

Cannot connect to the network.

• Make sure the wireless LAN router/

access point is turned on.

• Make sure the server is turned on.

• The network settings on the receiver

may be incorrect. Check the network

status. See “Information”, then select

“Physical Connection” in step 2

(page 95).

If “Connection Fail” appears, set up

the network connection again

(page 57).

• The server may be unstable. Restart it.

• Confirm that the receiver and the

server are connected to the wireless

LAN router/access point correctly.

• Confirm that the server has been set

correctly (page 57). Confirm that the

receiver has been registered to the

server and allows the music streaming

from the server.

• When the system is connected to the

wireless network, move the receiver

and the wireless LAN router/access

point closer to each other.

• If the ICF (Internet Connection

Firewall) function is active on the

computer, this may prevent the

receiver from connecting to the

computer (only when your computer is

used as a server). You may need to

change the firewall settings to allow

the receiver to connect. (For details on

changing the firewall settings, refer to

the operating instructions supplied

with your computer.)

• If you have initialized the receiver or

performed a system recovery on your

server, perform the network settings

again (page 57).

The server (such as a computer) does

not appear in the server list. (“No

Server” appears on the TV screen.)

• You may have turned on this receiver

before you turned on the server.

Refresh the server list (page 62).

• Make sure that the wireless LAN

router/access point is turned on.

• Make sure that the server is turned on.

• Confirm that the server has been set

correctly (page 57). Confirm that the

receiver has been registered to the

server and allows the music streaming

from the server.

• Confirm that the receiver and the

server are connected to the wireless

LAN router/access point correctly.

Check the network setting information

(page 95).

Home Network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DN840 Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-DN840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info