Bedienungsanleitung Sony STR-DN840 (Seite 114 von 140) (Englisch)

581035

114

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

114US

• Refer to the operating instructions of

your wireless LAN router/access

point, and check the multicast setting.

If the multicast setting is enabled on

the wireless LAN router/access point,

disable it.

Cannot play audio data normally.

• Shuffle Play is selected. Press

SHUFFLE repeatedly until “SHUF”

disappears.

Play does not start, or does not

automatically change to the next track

or file.

• Make sure that the audio file you are

trying to play is in a format supported

by this receiver (page 62).

• WMA files with DRM copyright

protection cannot be played back.

For how to check the copyright

protection of a WMA file, see page 65.

The sound skips during playback.

• The bandwidth of your wireless LAN

may be too low. Move the receiver and

the wireless LAN router/access point

closer to each other, without any

obstacles in between them.

• When using your computer as a server,

the computer may be running many

applications. If anti-virus software is

active on the computer, temporarily

disable the software as it needs large

amount of system resources.

• Depending on the network

environment, it may not be possible to

play tracks with more than one device

operating at the same time. Turn off

another device to enable the receiver to

play tracks.

“Cannot Play” appears.

• You cannot play any files other than

audio files.

• Confirm that the server has been set

correctly (page 57). Confirm that the

receiver has been registered to the

server and allows the music streaming

from the server.

• Check to confirm whether the audio

file on the server has been damaged or

erased. Refer to the operating

instructions supplied with the server.

• You cannot play the following tracks:

– A track that violates playback

restrictions.

– A track with irregular copyright

information.

– A track that you purchased at an

online music store that does not

allow home network streaming.

– A track in a format unsupported by

the receiver (page 62).

• Confirm that the selected track has not

been erased from the server. If the

track has been erased, select another

track.

• Make sure that the wireless LAN

router/access point is turned on.

• Make sure that the server is turned on.

• The server may be unstable. Restart it.

• Confirm that the receiver and the

server are connected to the wireless

LAN router/access point correctly.

“No Track” appears.

• If there are no tracks or folders in the

selected folder, you cannot extend the

folder to display its contents.

Cannot play back a copyrighted WMA

format track.

• For how to check the copyright

protection of a WMA file, see page 65.

You cannot select a previously

selected track.

• The track information may have been

changed on the server. Reselect the

server in the server list (page 62).

Devices on the home network cannot

connect to the receiver.

• “Network Standby” may be set to

“Off”. Turn on the receiver or set

“Network Standby” to “On” in

Network Settings menu (page 96).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DN840 Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-DN840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info